tnseal
Active Member
Try operating the hazard switch several times, the switch isolates the stalk column switch and if not correctly reconnected the normal side to side lights will go wrong.
I must admit these circuits are a headache and I have been doing electrics for decades they still can do you up. The best way to go around any problem like this is by staging and noting what things you have tested. The fact that you have got the hazards working is proof that all wiring is going to the lamps. The switch could be wrongly wired, revise the wires and see if the column switch cut out is the right way around.
I must admit these circuits are a headache and I have been doing electrics for decades they still can do you up. The best way to go around any problem like this is by staging and noting what things you have tested. The fact that you have got the hazards working is proof that all wiring is going to the lamps. The switch could be wrongly wired, revise the wires and see if the column switch cut out is the right way around.