Hi
I've been ( slowly) rebuilding a 90, after converting from a van to a cab type, and basically taking on a lot of improvements along the way.
The biggest issue i have had was with the electrics as the loom was a real mess of DIY by previous owner(s). So out came the split charger, central console and winch circuit and a mile of 2.5mm green and yellow earth cable which was not being used as earth!!!
After getting a new loom from front to rear and all between from Autosparks i am now in a position where everything is working other than the rear offside indicator when using the turn switch.
All the indicators work when using the hazzard switch so the lamps are ok.
The front indicator lamp works on right turn just not the rear!!!
I have run a direct earth to the lamp so it is not that.
any ideas as i am pulling my hair out in lumps? Could it be that the brand new chassis loom from Autosparks is defective on that circuit?? or something else?
Any thoughts or suggestions would be welcomed
thanks
I've been ( slowly) rebuilding a 90, after converting from a van to a cab type, and basically taking on a lot of improvements along the way.
The biggest issue i have had was with the electrics as the loom was a real mess of DIY by previous owner(s). So out came the split charger, central console and winch circuit and a mile of 2.5mm green and yellow earth cable which was not being used as earth!!!
After getting a new loom from front to rear and all between from Autosparks i am now in a position where everything is working other than the rear offside indicator when using the turn switch.
All the indicators work when using the hazzard switch so the lamps are ok.
The front indicator lamp works on right turn just not the rear!!!
I have run a direct earth to the lamp so it is not that.
any ideas as i am pulling my hair out in lumps? Could it be that the brand new chassis loom from Autosparks is defective on that circuit?? or something else?
Any thoughts or suggestions would be welcomed
thanks