cornish rattler

Well-Known Member
Hi guys
I want to re-route my bottom rad hose ( S2a with a disco 200tdi engine using a 200tdi radiator ) i'm using a home made hose made from cut up 200tdi bottom hoses and still using the molded hose that goes from the bottom hose to the header tank and want to do away with this and plumb that in a different way so i need a hose that will go from the water pump straight to the radiator then plumb the header tank into a heater hose using a Tee piece, anyone know of a part number for a hose that will do or know of a hose that will do please :)
 
I cut my std S3 hose in half....with the aid of a suitable distance section of suitable sided metal tube joined back together....allows lots of choice then for different angle.
 
I cut my std S3 hose in half....with the aid of a suitable distance section of suitable sided metal tube joined back together....allows lots of choice then for different angle.
Are right ok i will look at that, i did another tdi conversion many many years ago and just used a flexi hose from Halfords which did the job well but can't remember the part number and can't find anything in thier stores either but will keep looking as well as you suggested ;)
 
Are right ok i will look at that, i did another tdi conversion many many years ago and just used a flexi hose from Halfords which did the job well but can't remember the part number and can't find anything in thier stores either but will keep looking as well as you suggested ;)
Looks better than flei hose as well.
 
This is on my list of "to do". A pipe that takes a standard series hose, cut down, at either end and has a boss for a temperature sensor to switch an electric fan or two. In alloy with mountings for the disco timing belt case.
 

Similar threads