Hi I'm chasing how much pressure I can run before I do damage to the motor. The motor has no egr as its a 94 model 110 wagon. I have the same question on the Australia web site
Thank you for anyone's time
I have been running mine at 16psi for well over a year and have had no problems so far ??
Does that 0.1 bar increase make a difference?
Yes got a boost gauge on mine what's 1bar in psi ??
1bar is 14.5psi
Blue beastly beat me to it....
Has anyone run an EGT probe at 16psi to see what temps they are getting both with a standard and uprated cooler?
Tonks4x4 - The Land Rover Specialist
So do you think I could boost up a little bit more ? I am going to be what a bigger cooler 1st tho
I have just dun the Head gasket and put a new timing Belt on it I also Polished and tryyed to port the head and relaped the Valves so its running good .my plan is to get a Universal intercooler off eBay and fit it Myself then wind up the pump up a little bit more and turn the boost up 18/20 psi I should fit a Exhaust temperature gauge to ?! I not going to go to mad tho I don't want to keep blowing up the Engine haha
Have they got bigger coolers ?