wheel studs are normally just a press fit into the hub/drive flange - shud be easy to knock the brokken one out and fit a new one.
best yer check first as some studs are screwed it and if you try belting it out you'll most likey end up doing damage. get the new one and check if it screw in or press in. if its press in you can use the nut and some form of spacer to pull it through. screw in ones can be got out using a pipe wrench if there is enough sticking out, or grinding a couple of flats on it, or cutting a slot for a screw driver( which int the best option).
steve (the magpie)
New Member
why not ring round the breakers yard for a second hand one if you cant get one new stud from main dealer second hand hub would be a cheaper opp and easy fit than paying dealer £s for one
Attempted theft.
The studs are pull-in splined items, easy to knock out the bust one, and pull in a new one using a wheel-nut and a spacer like a big nut or a stack of washers.
CharlesY
