cobra_mark

New Member

• Jun 13, 2010

• #1

Brakes are firm and bled okay initial braking is good but if you lift off and press lightly the bite is very good.

Could this be a servo pipe/filter leak issue?

I have followed the pipes around all seem in good condition ( 116k 2000 TD5)

Pads and discs are okay but will need replacement, but I do not feel contribute as it centres on servo efficiency.

Thanks for any suggestions in advance.

 

thebiglad

Well-Known Member

• Jun 13, 2010

• #2

cobra_mark said:

Brakes are firm and bled okay initial braking is good but if you lift off and press lightly the bite is very good.

Could this be a servo pipe/filter leak issue?

I have followed the pipes around all seem in good condition ( 116k 2000 TD5)

Pads and discs are okay but will need replacement, but I do not feel contribute as it centres on servo efficiency.

Thanks for any suggestions in advance.

Click to expand...

This is a known issue with Disco TD5 - not a fault as such.

 

Kernow nige

New Member

• Jun 13, 2010

• #3

thebiglad said:

This is a known issue with Disco TD5 - not a fault as such.

Click to expand...

thas good news........not only me then

 

M

martinhollings

New Member

• Jun 13, 2010

• #4

as said mine is the same

 

cobra_mark

New Member

• Jun 14, 2010

• #5

Well I feel semi reassured . Thanks guys thought it was just me. A bit scary sometimes though if your stopping distances are not good.

 

J

jsbholden

New Member

• Jun 14, 2010

• #6

and me!!!