T

Tom591

Member

• Feb 25, 2019

• #1

Does anyone have the part number for the 2 bolts that hold the oil drain pipe to the underside of the turbo?

The heads are starting to get a bit rounded on mine, and I'd like to replace them.

Also, what is the likelihood of stripping the threads in the block if I replace the whole turbo oil drain pipe? I see it screws directly in to the engine, is it best to leave well alone?

Thanks in advance.

 

J

joojar

Active Member

• Feb 25, 2019

• #2

Replaced my pipe, no particular problems at the bottom end assuming you can lay hands on crows foot spanner or similar.

Old thread on same topic: https://www.landyzone.co.uk/land-rover/turbo-oil-drain-pipe-leak.318732

 

T

Tom591

Member

• Feb 26, 2019

• #3

Thanks joojar.

That topic answers my questions regarding the pipe, but I still can't see any mention of the part number for the bolts.

 

sierrafery

Well-Known Member

• Feb 26, 2019

• #4

Those bolts are not listed at all in microcat so you'll have to remove them and buy based on measurement.... my guess is that it's M8 x 1.25

 

Last edited: Feb 26, 2019