owas
Well-Known Member
I know, I need to change it at some point but for now it'll do
I know, I need to change it at some point but for now it'll do
I have a problem with my gear selector so I am buying a Slick Shift. Is it something fairly easy to do at home? I know that depends on knowledge, but my mechanic is booked up and I could really do with it fitted asap as i cant get some gears in my TD5 Disco. Is it fitted from above in cab or below on ramps? any tips appreciated
JimS
Well-Known Member
Fitted from above, straightforward job only takes an hour or so including fiddling with the bias springs, theres some vids on youtube
Are you sure the problem is selector related?
Thanks, so remove the gaiter around gear stick and I can get to everything I need from above? That's good, maybe I can do it myself then.
Not certain it's selector related but the next step is gearbox out and new clutch (need clutch anyway, I THINK, but this may prove otherwise). Mechanic (LR specialist) is pretty sure I have a selector problem as sitting in it for 10 mins feeling the gear change with engine off, he said it's terrible, no spring tension and no positivity. Its an upgrade worth doing I think, if it doesn't solve the problem then I am only back to doing clutch which this may give me chance of avoiding, slim chance maybe
Not certain it's selector related but the next step is gearbox out and new clutch (need clutch anyway, I THINK, but this may prove otherwise). Mechanic (LR specialist) is pretty sure I have a selector problem as sitting in it for 10 mins feeling the gear change with engine off, he said it's terrible, no spring tension and no positivity. Its an upgrade worth doing I think, if it doesn't solve the problem then I am only back to doing clutch which this may give me chance of avoiding, slim chance maybe
flounderbout
Member
As JimS says it is a very easy job - an hour is plenty and no skill required. I recommend this video which I thought was the clearest.
You will need some silicon sealant as well as what you get in the box.
Once you have fitted it then spend some time getting the springs set up just right - the difference between spot on and a tiny bit out is the difference between a perfect change, and occasional catching.
You will need some silicon sealant as well as what you get in the box.
Once you have fitted it then spend some time getting the springs set up just right - the difference between spot on and a tiny bit out is the difference between a perfect change, and occasional catching.
flounderbout
Member
IIRC I got mine here https://www.onlinegearboxparts.com/product/defender-lt77-slickshift/
Thanks, no video for me just a still image. Any chance you could paste the link as unlinked text so it doesn't try to make it a clickable thumbnail. Maybe remove everyything up to and including the www.
silicon - i have loads of household silicon, and sticks like **** (won't use that!!). I think I have some 'instant gasket" which i think is silicon, used it for boat engine some time and still have half a tube, maybe that will do?
look forward to finding out if this helps my selection problem thanks
silicon - i have loads of household silicon, and sticks like **** (won't use that!!). I think I have some 'instant gasket" which i think is silicon, used it for boat engine some time and still have half a tube, maybe that will do?
look forward to finding out if this helps my selection problem thanks
jamesmartin
Well-Known Member
could just repair the bias plate
Shimsteriom
Master Procrastinator
www . youtube.com/watch?v=1mWaNkO1lIE&feature=emb_logo
flounderbout
Member
Not sure why it's doing that. If you search youtube for "PM345 Slickshift for Defender Gearboxes R380 and LT77 fitting guide" you will get the vid
JimS
Well-Known Member
Yes same R380 box
jamesmartin
Well-Known Member
seems pointless buying the kit just uses a different method of adjusting the bias springs
jamesmartin
Well-Known Member
its different
jamesmartin
Well-Known Member
fair enough ,on the defender it alters the stick pivot point altering stick travel, on the disco it doesnt just gives a different way of adjusting bias springs
