bigal61red
New Member
Hi folks i have just bought a 1999 disco td5 which as they all seem to be sluggish at certain points. has anybody got a suggestion as to either re map or chip. which is best .
Cant tell you which to go for, but moore power makes moore heat which stretches manifold bolts and snapps them, so do swap them for the suitable ones, lot fall fowl.
Mark
cheers andy. much appreciatedHi
It might be worth checking a few things on your car as it could be down on power. There are sensors that can get dirty over time and affect performance. You could try the following...
1. The MAP sensor on the inlet manifold being bunged up with oil. Spray with contact cleaner to clean.
2. The MAF sensor after the airbox could be dirty. Clean element carefully with contact cleaner and a few cotton buds. Also clean the electrical contacts on the multi plug.
3. The EGR valve could do with being blanked off if not already done. There is no beneift to the EGR. Get a kit off Ebay for £6 or so.
4. Turbo wastegate arm can stick, affecting power.
I have dome all these on my 2000 TD5 since I got it. They all made a difference. Cleaning the MAP made a significant improvement. I cleaned the MAF on Thursday and the car is much nicer to drive. It pulls better, revs out more and genearlly feels much nicer to drive. Really happy with the result.
It's always a good idea to make sure the car is running right. A session on a disagnostic tool at an independant for £30 could also be a good idea.
From what I gather a remap is alway better than a plug in box, which just fools the signals from the ECU to the injectors.
Cheers
Andy
Hi folks i have just bought a 1999 disco td5 which as they all seem to be sluggish at certain points. has anybody got a suggestion as to either re map or chip. which is best .
This gunge comes from the EGR valve. You should fit a blanking plate or remove the EGR valve completely to keep this clean