jamesmartin
Well-Known Member
until some one looks state of bearings etc is unknown but i usually get a good secondhand unit and the bearings if they are good its a good indicator for the rest
discodrivercumbria
Well-Known Member
that would be only the "naked" block and we are speaking about the chains/tensioners/etc here aren't we?
what's this then?
landrover defender or discovery TD5 turbo diesel engine TD5 2000 P10 | eBay)
sierrafery
Well-Known Member
I don't know really, but what's in the pic doesnt look like a Td5 to me... when you said "short" i thought you meant what they usually call "short engine", like this Turner Engineering - Replacement and Remanufacturer of Land Rover Engines including 300TDI, 200TDI, TD5, V8, turbo diesel & petrol etc, available from stock
jamesmartin
Well-Known Member
short engine is just block crank and pistons, stripped has no ancillaries
discodrivercumbria
Well-Known Member
ok all! a recon then, :amen:
notenoughtime
Active Member
If the sumps off surely worth checking mains? Or can't you do that on these? Never stripped one?
thebiglad
Well-Known Member
Bennehboy
Well-Known Member
Yeah the mains can be checked and done from below, so can the big ends. Pretty sure the thrusts can also be done.
notenoughtime
Active Member
That's what I would do before I even thought of a new pump!
Bennehboy
Well-Known Member
Aye, as I already said, the engine needs pulling and fully inspecting - I know it's a pain but worth doing because the cost of new parts can then be weighed against the cost of a replacement engine (which as James said I'd also want to check the bearings on).