Karmannski

Karmannski

Member
Hi all

I have blocked my EGR valve this weekend and I noticed massive lost of power.
I have blocked the vacuum pipe with the plug that was supplied in the kit.

Is there is anything else that I need do?
 
Hi Neilly

Yes I did, replaced it with the straight pipe that came with the set, and blanked the vacuum pipe with the rubber stick that was also included in the kit.

Karmannski
 
Thank you, just had a read.
The only think I didn't do is the vacuum plug I have not unplugged that.

Will it help ?
 
If you have followed all steps to remove your EGR, "massive lost of power" should not come from it. Could it be that during your work you have demaged, removed something which couses your issue. Check all connectors, pipes and if you can, read error codes.
 
Ok, all sorted

MAP sensor was unplugged. looks like after cleaning it out I decided not to plug it back in - hehe thanks guys for help
 
You must log in or register to reply here.

Similar threads

A
Discovery 4 2010 loss of power
Replies
3
Views
236
gstuart
gstuart
bahteles
D2 Td5 - EGR Delete, should also remove vaccum solenoid?
Replies
4
Views
434
sierrafery
sierrafery
J
Disco 1 Is the the EGR sensor? 300tdi
Replies
6
Views
457
sierrafery
sierrafery
A
Discovery 4 (2016) gives error code P045B-77 EGR “B” - does EGR valve need to be replaced?
Replies
0
Views
199
ahannula
A
K
Disco 2 Nanocomm does not bleed after 0.5L or more of brake fluid was lost in braking system
Replies
2
Views
337
Kaijun
K