S

Steveo10

New Member

• Dec 27, 2019

• #1

Hi, I've stripped a head off to change the Headgasket. The push on connectors for the glow plugs just disintegrated as I touched them....
I've had a look about but can't seem to find much of a 'fix'....
There were only 1 working out of the 4 anyway.
Any help appreciated,

Thanks,

Steveo

 

sierrafery

Well-Known Member

• Dec 27, 2019

• #2

Cut them off and use proper ID( IIRC 4mm) insulated female bullet or banana plugs... the wiring is integral part of the engine main harness so not replaceable alone

 

B

brianconwy

Well-Known Member

• Dec 27, 2019

• #3

Three of mine disintegrated. I had a loom with the replacement engine I bought so I cut three of them off that and soldered them onto my harness. Not the prettiest soldering job but strong.

 

S

Steveo10

New Member

• Dec 28, 2019

• #4

Thankyou, that will get me sorted.