Welcome.
What's the problem with 'er?
Hey mate I was driving my Landy back from the shop and it suddenly died on me engine and dash I went to start it again and nothing happened no power to dash not even turning over then it started again but now same problem but now not starting at all. Power to the battery as checked but still nothing to the dash
 
Go to the interior fusebox with a paperclip and make a bridge in the attached connector C0028 across the pins with the brown and yellow wire, if the dash comes to life then the ignition switch is fubar if still no activity check fuse F27 there and if it's OK fusible link FL8 in engine bay fusebox then if still no joy we'll speak again

C0028RHD.jpg
 
I’ve done all that mate but the dash is flickering at me as if there’s a wire touching somewhere but can’t locate it as soon as I go to pull off it cuts out
 
So you bridged those wires and the lights came on then you cranked it with that bridge there and did what you said or how? explain better what happens
 
Did you miss my post before that?... i want to help but i need more information
I think I did sorry. Well a little update it does start but sometimes I get no lights at all it's like something is tripped it out when I go to pull off it cuts out
 

Similar threads