badlad · May 1, 2013

First of all my apoligies if this has been asked before. With a bit of reading through this very forum (thank you all btw

) I decided to tackle the airbags on the rear of me discovery. Passenger side straightforward enough, looked like an original bag ffs. On approaching the drivers side I noticed that the bag had been changed sometime in its past, evident by the fact that the screw connector had been removed and the push fit into the airbag. Now here are the questions.

Can I remove said push fit connector or do I have to cut it?

New bag on passenger side seems a very loose fit at the bottom. I presume this is because there is no air in it atm. Or have I messed up.

Should I leave bag in drivers side and sell my remaining new one

Thanks

spanishlair · May 1, 2013

Who on earth ( in there right mind) is gonna buy one airbag second hand? I am sure on the forum there is a" how to" on changing the bags. It sounds like yours is a mess, but all will become clear when you read it.

badlad · May 1, 2013

spanishlair said:
Who on earth ( in there right mind) is gonna buy one airbag second hand? I am sure on the forum there is a" how to" on changing the bags. It sounds like yours is a mess, but all will become clear when you read it.

Never mentioned selling a second hand one my good man

Quote 'Should I leave bag in drivers side and sell my remaining new one' Unquote

spanishlair · May 1, 2013

You had it new, thats first hand, you sell it on, thats second hand.

nathan5346 · May 1, 2013

spanishlair said:
You had it new, thats first hand, you sell it on, thats second hand.

Are you stupid?

biggeeeee · May 1, 2013

nathan5346 said:
Are you stupid?

Sounds like it. :doh:

Here's the guide

http://www.landyzone.co.uk/lz/f68/disco-ii-air-suspension-definitive-guide-171995.html

badlad · May 1, 2013

spanishlair said:
You had it new, thats first hand, you sell it on, thats second hand.

Its still in the box, unopened. that makes it new. I could send it back to supplier under distance selling regulations if I wished and I bet they sell it on as new. Anyways was looking advice not an argument

Thankfully I have found out the answer to the question

badlad · May 1, 2013

biggeeeee said:
Sounds like it. :doh:

Here's the guide

http://www.landyzone.co.uk/lz/f68/disco-ii-air-suspension-definitive-guide-171995.html

Thanks. Had a look at the guide before starting but I didn't notice any mention of changing a non original bag. It appears that the push fit connector on the Dunlop bags can be released from the pipe without further cutting of the pipe

spanishlair · May 1, 2013

badlad said:
Its still in the box, unopened. that makes it new. I could send it back to supplier under distance selling regulations if I wished and I bet they sell it on as new. Anyways was looking advice not an argument

Thankfully I have found out the answer to the question

There was no argument. Only advice.

gemsdad · May 1, 2013

spanishlair said:
There was no argument. Only advice.

but not a very good answer was it.

badlad

Active Member

spanishlair

New Member

badlad

Active Member

spanishlair

New Member

nathan5346

Well-Known Member

biggeeeee

Retired - Living the dream

badlad

Active Member

badlad

Active Member

spanishlair

New Member

gemsdad

NOT BOTHERED.

Similar threads