Bobbyell

New Member

• May 3, 2011

• #1

Evening Guys

I am still looking for a nanocom or hawkeye owner to read some fault codes and hopefully reset my three amigos after i have changed the hub this week.
I am between Oxford and Reading but willing to travel in the oxfordshire, buckinghamshire and berkshire area.

If anyone can help will come with beer.

cheers

 

ratty

I'm not special I'm limited edition

• May 5, 2011

• #2

If you're driving through Somerset at any point you can give me a shout.

 

G

Graham Carter

Active Member

• May 5, 2011

• #3

Try MID Engineering just outside Wantage - they look after my Disco 2 and are very helpful. Tel 01235 771114.

Their labour rates are much less than main dealer as well.
Cheers!

 

thebiglad

Well-Known Member

• May 6, 2011

• #4

Bobbyell said:

Evening Guys

I am still looking for a nanocom or hawkeye owner to read some fault codes and hopefully reset my three amigos after i have changed the hub this week.
I am between Oxford and Reading but willing to travel in the oxfordshire, buckinghamshire and berkshire area.

If anyone can help will come with beer.

cheers

Click to expand...

Have a look on the D2Boys Club website for Nanocom/Hawkeye locator.

 

synapse

New Member

• May 6, 2011

• #5

Bobbyell said:

Evening Guys

I am still looking for a nanocom or hawkeye owner to read some fault codes and hopefully reset my three amigos after i have changed the hub this week.
I am between Oxford and Reading but willing to travel in the oxfordshire, buckinghamshire and berkshire area.

If anyone can help will come with beer.

cheers

Click to expand...

Hi there,

I'm in Thame if that's any help - if so give me a PM and I'll send you my mobile by return?

Steve

 

B

BigJock2007

Member

• May 8, 2011

• #6

I'm in High Wycome with a Hawkeye enabled for my 04 Td5 Disco.

 

B

BigJock2005

Active Member

• May 8, 2011

• #7

I'm in High Wycome with a Hawkeye enabled for my 04 Td5 Disco.

 

T

therealboss

New Member

• May 10, 2011

• #8

I will be in Wargrave RG10 late next week if that is any good, I have a Nanocon in the Disco all the time.

 

synapse

New Member

• May 10, 2011

• #9

Lots of offers and no response from the original poster........... presume he must be sorted by now ?

S

 

Last edited: May 10, 2011

Clanforbes

New Member

• May 10, 2011

• #10

It's sad but it happens a lot, people come on, ask a question and get all the help they need then we never see them again, though with 28 posts to his credit he's not exactly a newbie.

 

Bobbyell

New Member

• May 14, 2011

• #11

Sorry fellas have been away on a exercise for a few weeks, Just getting back to work on the disco. Many thanks for all your help am in contact with someone with a Nanocom and will be meeting up.
Synapse if you are still available i will call over the weekend to arrange a meeting.

Thanks again fellas, if i dont get back to you straight away it is probably because the good old british military have me away at short notice.

 

synapse

New Member

• May 14, 2011

• #12

Synapse if you are still available i will call over the weekend to arrange a meeting

Click to expand...

That's no problem - give me a call on the number I gave you and we can sort something,

Steve

 

synapse

New Member

• May 14, 2011

• #13

synapse said:

That's no problem - give me a call on the number I gave you and we can sort something,

Steve

Click to expand...

Sorry, you have another PM re my phone number, please read before trying to ring

Steve