JimS

Well-Known Member

• Jun 27, 2019

• #1

TD5 110 X reg with close to 150,000 miles on the clock
As it's approaching a milestone I'm going to give it a good look over. It's running well at the moment, had a replacement head at 100K and a turbo at 140K. Runs good, pulls well, no smoke, starts on the button and I want to keep it that way.
What's recommended to do aside from the usual fluids and filters for higher mileage?
I'm thinking belt tensioner, check oil pump nut, hoses etc
What normally gives way on these engines?

 

jamesmartin

Well-Known Member

• Jun 27, 2019

• #2

apart from having a look at crank bearings id change bits as they fail

 

Gmacz

Well-Known Member

• Jun 27, 2019

• #3

Just drive the td5, it will show you when it needs help. Keep on top of the oil changes though.

 

zeaphod

Well-Known Member

• Jun 27, 2019

• #4

+1 for the oil changes, and a look inside the intercooler to inlet hose will show you if the engine is breathing heavily. If you're at all worried an emissions test can also show up many issues at an early stage.

 

JimS

Well-Known Member

• Jun 28, 2019

• #5

Gmacz said:

Just drive the td5, it will show you when it needs help. Keep on top of the oil changes though.

Click to expand...

Yes oil change annually whether it needs it or not (I don't do too many miles in it)

 

sea27n

Active Member

• Jun 29, 2019

• #6

Mine has hit 180,000 i give it a full service every 5000 miles

 

Discodevon

Well-Known Member

• Jun 30, 2019

• #7

jamesmartin said:

apart from having a look at crank bearings id change bits as they fail

Click to expand...

Do you need to take the sump off to do this I’m guessing mate?

 

gazman

Well-Known Member

• Jul 2, 2019

• #8

For the price of a td5 engine, I'd just keep it well serviced. They are 10 a penny now and not worth the agro of checking mains IMO.

 

tottot

Well-Known Member

• Jul 2, 2019

• #9

Keeping the cooling system in good order, if hoses or rad are looking tat change them.