L

landynutterme

New Member

• Sep 28, 2023

• #1

Hi everyone, good to meet you all

i bought myself a discovery 2 recently which i love, ive been under the bonnet trying to cure the dreaded front end rattles.

ive replaced the serpentine belt and tensioner and the rattle is better, all the pulleys seem fine but i need advice on the crankshaft pulley/damper.

Is it normal for the rear pulley to rotate independently of the damper, mines moving (rotating) approximatly 30 degrees back and forth and clonks metal on metal when it stops.

appreciate any help..

 

sierrafery

Well-Known Member

• Sep 28, 2023

• #2

landynutterme said:

mines moving (rotating) approximatly 30 degrees back and forth and clonks metal on metal when it stops.

Click to expand...

Hi, that's fubar then

 

T

tilly2

Well-Known Member

• Sep 29, 2023

• #3

I agree.... the two parts are suposed to be bonded together by the rubber.... it acts as a vibration shock absorber.

 

Landmark2

Well-Known Member

• Sep 30, 2023

• #4

Here's a write up from UP's site

www.discovery2.co.uk / Crankshaft pulley / TV damper replacement

 

berg450

Well-Known Member

• Oct 3, 2023

• #5

I replaced mine following the above linked instruction. Worked well
Be prepared with "special" tools or strong help.