landrovermadness · Jan 10, 2009

hello every one has any body under taken a td5 conversion into an early 90?
i am in the middle of doing one and im sure that there is a piece of the car wiring loom missing ie the glow plug relay and adjacent wiring to the fuse box under the bonnet

has anyone got a td5 i could look at to compare?

thankyou for reading this..

nobber · Jan 11, 2009

you might need a td5 main harness.
especially if the fuse boxes are in different positions, would certainly make things easier.

buckshot · Jan 11, 2009

landrovermadness said:
hello every one has any body under taken a td5 conversion into an early 90?
i am in the middle of doing one and im sure that there is a piece of the car wiring loom missing ie the glow plug relay and adjacent wiring to the fuse box under the bonnet has anyone got a td5 i could look at to compare?

thankyou for reading this..

RESPECT!
good on ya mate not heard of anyone doing 1 but would be interested in how it goes (converting) i got a 56 plate 1 if you want to come to me for a look see
post up plenty of picys we likes picys

would love to do a td5 for a trialer

The Mad Hat Man · Jan 11, 2009

buckshot said:
would love to do a td5 for a trialer

if ya that bored - i gorra job or two yu could do

buckshot · Jan 11, 2009

The Mad Hat Man said:
if ya that bored - i gorra job or two yu could do

i was thinking more on the lines of a few weekends of durdy hands and skinned knuckles not a lifetimes work :mooning: :hysterically_laughi :hysterically_laughi :bolt:

landrovermadness · Jan 11, 2009

heres a couple of pics will try and take some more

buckshot · Jan 11, 2009

landrovermadness said:
View attachment 8426

View attachment 8427

View attachment 8428

heres a couple of pics will try and take some more

well looks like a :scratching_chin: :whoosh: :whoosh: for me

try putting your picys on photobucket then you will bigger and better quality picys
(gettin too long in the tooth to strain me eyes at small picys):hysterically_laughi :hysterically_laughi

landrovermadness · Jan 11, 2009

i will try that. yes it is very complicated but with a lot of reading wiriing diagrams i think it will run.

landrovermadness · Jan 11, 2009

any of ya are quite welcome to come and have a look at the conversion cast your oppinion :tea: and have a cuppa

landrovermadness

New Member

nobber

Well-Known Member

buckshot

Well-Known Member

The Mad Hat Man

Well-Known Member

buckshot

Well-Known Member

landrovermadness

New Member

buckshot

Well-Known Member

landrovermadness

New Member

landrovermadness

New Member

Similar threads