C

Clarkie92

New Member

• Sep 16, 2016

• #1

Hi all,
My disco developed a bit of a knock when turning or driving over speed bumps etc..
It turns out it's one of the bushes on the centre pivot linkage.
I've been having a look for a replacement and have seen they're around 150 with the vat how ever a poly bush set with the arms is only 114..
Should I go for the polybush or standard? And where is the best place to get them?
Cheers

 

sierrafery

Well-Known Member

• Sep 16, 2016

• #2

Go for rubber, try island4x4

 

jamesmartin

Well-Known Member

• Sep 16, 2016

• #3

Clarkie92 said:

Hi all,
My disco developed a bit of a knock when turning or driving over speed bumps etc..
It turns out it's one of the bushes on the centre pivot linkage.
I've been having a look for a replacement and have seen they're around 150 with the vat how ever a poly bush set with the arms is only 114..
Should I go for the polybush or standard? And where is the best place to get them?
Cheers

Click to expand...

try rgw100020 if its just the center bearing or da1199 for the kit, ive fitted a few britpart ones all have lasted well

 

C

Clarkie92

New Member

• Sep 17, 2016

• #4

OK I'll have a look now..
Is there any particular reason for using rubber other than it being a bit stiffer?
I thought polybush kit was the way to go..
Cheers for replying guys

 

sierrafery

Well-Known Member

• Sep 18, 2016

• #5

A friend of mine fitted poly bushes and they worn out like cheese in no time.... though he is climbimg rocky hills quite often, i'd not use them on my own car but as everything is a matter of choice though