discomania
Well-Known Member
I would drop the tank a little, if it closes for the sake of the thickness of the cap I would not be concerned about it being too low.
Look how it is mounted, mine is mounted onto the fold back on the wing with a support down to the inner wing, you may need to make 2 small standoffs so you can drop it 1/2 an inch or whatever.
It seems like the only option worth considering.
Look how it is mounted, mine is mounted onto the fold back on the wing with a support down to the inner wing, you may need to make 2 small standoffs so you can drop it 1/2 an inch or whatever.
It seems like the only option worth considering.
wiltshire landyman
I’m back
what about adjusting the rubber stops on the front of the bonnet?
discomania
Well-Known Member
If he increases the length of the stops he will then have latch problems as it stands the extra height of the expansion cap appears to be too much (it is probably about 1/4 of an inch, which will be more at the latch) as he says it doesn't close at the moment, i.e. the latch won't latch, so if he lifted it on the stops the latch still would not latch. Also these bonnets have a big enoguh gap around them as it is!
bustersbus
Well-Known Member
Or ye could check to see if they plastic things that fit into the hooks on the bulkhead are fitted the right way
killnorton
New Member
6 small washers mat brings it out just right i have the tdci bonnet and its as easy as that
