In low it engages reverse perfect its like something inside the box is not telling it to engage reverse when in highi meant in reverse ,but it does sound like a box needs attention
In low it engages reverse perfect its like something inside the box is not telling it to engage reverse when in highi meant in reverse ,but it does sound like a box needs attention
and the wont select first and the grinding?In low it engages reverse perfect its like something inside the box is not telling it to engage reverse when in high
It will select 1st but just doesnt show it on the dash and the grindin is more like an air escaping sound when foot on acceleratorand the wont select first and the grinding?
i think its best you explain what it actually does and doesnt doIt will select 1st but just doesnt show it on the dash and the grindin is more like an air escaping sound when foot on accelerator
All gears and drive working fine in high apart from reverse only works sometimes then puts box in limp mode same when in low but if in reverse soon as transfer changed from high to low it jumps straight into reversei think its best you explain what it actually does and doesnt do
that isnt the full list you said 1st wasnt working?All gears and drive working fine in high apart from reverse only works sometimes then puts box in limp mode same when in low but if in reverse soon as transfer changed from high to low it jumps straight into reverse
Sorry 1st gear is working just doesnt show up on dash when selected every other gear shows up on dash when selected sorry am not the best at expaining things and this jeep has got my head shattered alls i done was change a diff and gear oil now this started before that it was perfectthat isnt the full list you said 1st wasnt working?
does selector illuminate each selected gear
It will after a few trys but then the m s lights starts flashingtry putting it in rev and if it doesnt select mover the lever to see if you can get it to
they will do , moving lever helps it select it suggests cable is badly adjusted,often were cable clamp to the box mountIt will after a few trys but then the m s lights starts flashing
Could this have been nocked while changing a front diff?they will do , moving lever helps it select it suggests cable is badly adjusted,often were cable clamp to the box mount
Yes sometimes it wont show R then when messed with it willshouldnt have been but who knows,does moving the lever alter dash readout
Hi pal just cleaned my ecu and all wiring behind glovebox and also cleaned xyz switch connectors with brake cleaner now its fine but sometimes wont select reverse from park but does from every other gear also showing up 1st on the dashshouldnt have been but who knows,does moving the lever alter dash readout
The cable going to the xyz switch?you might need a slight adjustment of cable to ensure full selection of reverse
yes the bowden cable,xyz switch is also on slotted holes so you cab adjust it so dash light coincides with gear selectedThe cable going to the xyz switch?
Ok thanks for help going to test drive tomorrow and will update any infoyes the bowden cable,xyz switch is also on slotted holes so you cab adjust it so dash light coincides with gear selected
if youve had cable off to do xyz switch is possible it needs fine adjustment to ensure each selection is fullOk thanks for help going to test drive tomorrow and will update any info
Yes i had cable off the end all is well now but only tested on garden gunna test drive tomorrow will let you know thanks for your time much apreciatedif youve had cable off to do xyz switch is possible it needs fine adjustment to ensure each selection is full