First of all my front diff went so while i was changing that i thought i would change the tranny fluid all was well before but ever since it hasnt been the best selecting gears and reverse is playing up i have to put it in low in order to select reverse and 1st wont shoe up on the dash when i select reverse the m s lights flashwhat was old oil like,grinding if from the auto box is unusual but not unheard of if an epicyclic hub is breaking up,
Yes with engine started running throught the gears ontil it weeps out the filler plug oil that came out wasnt the best tbh but before the oil change the gearbox was finedid you fill oil to level with engine running
It will select drive perfect then when i put it in reverse it wont grab so if i put it in low it nocks into reverse then the m s lights flash also struggles to change gear in low but fine in highare you sure there are no other reasons for no drive ie t/box
Thanks for reply just curious that the gear change was fine ontil i put fresh fluid in and there is enough so the fresh fluid has caused the problemsounds like box needs to come out
new oil is very detergentThanks for reply just curious that the gear change was fine ontil i put fresh fluid in and there is enough so the fresh fluid has caused the problem
So do you think new gearbox is in order or will filter be blocked up?new oil is very detergent
from what youve said id fit another or look in yoursSo do you think new gearbox is in order or will filter be blocked up?
Ok appreciate the replysfrom what youve said id fit another or look in yours
Is there any sensors i could have nocked off changing the front diffOk appreciate the replys
Is there any sensors i could have nocked off changing the front difffrom what youve said id fit another or look in yours
noIs there any sensors i could have nocked off changing the front diff
Sorry my head is exploding with it with tbox in high it wont select reverse just revs as if in neutrel but when tbox in low it will engage reverse and drive but then the m s lights flash causing limp mode anytime reverse is selectedno
It will select drive perfect then when i put it in reverse it wont grab so if i put it in low it nocks into reverse then the m s lights flash also struggles to change gear in low but fine in high
you could explain that better if you want conformation
does it feel its slipping in low,presumably oil was blackishSorry my head is exploding with it with tbox in high it wont select reverse just revs as if in neutrel but when tbox in low it will engage reverse and drive but then the m s lights flash causing limp mode anytime reverse is selected
Yes it struggles to change gear in low and oil wasnt the best tbhdoes it feel its slipping in low,presumably oil was blackish