A

Agc37

Member

• Nov 1, 2015

• #1

Hi guys. Not been on for a while but hoping get back on more regularly now. Just replaced my transfer an gear box an while doing so noticed my breathers and air suspension pipes looking worst for wear. The breathers are an easy fix. But I was wondering what I need to replace the air suspension pipes. Would I be correct with 4mm piping and 4mm olives for the fittings at air bag an compressor ends?

Thanks.

 

sierrafery

Well-Known Member

• Nov 1, 2015

• #2

Hi, the answer is yes but check at the bags cos it's possible to be push-fit there if they are not the originals

 

A

Agc37

Member

• Nov 1, 2015

• #3

Not got push fit on the bags. Thanks sierraferry

 

sierrafery

Well-Known Member

• Nov 1, 2015

• #4

the voss connectors are like this, you can reuse them provided the o-ring is not damaged, but if it is you can find only the o-ring after dimensions

 

A

Agc37

Member

• Nov 1, 2015

• #5

Does the coller around the pipe make a difference? Can I use just a pipe without that coller?

 

sierrafery

Well-Known Member

• Nov 1, 2015

• #6

off course, that 'collar' is useless

 

A

Agc37

Member

• Nov 1, 2015

• #7

Thanks for the correction. Too many beers while researching.