Tids

New Member
hi all
i had prob with my air bags surpensone so fitted 2"lift kit
now when i drive down the road and go over 25 mph it keeps beeping and have a lite on the dash is there away to stop this and if so how do u do it
thanks dave
 
I presume you have replaced the airbags with coils.
Sounds like you need to tell the air ECU that you have changed it. The ride height sensors will be telling it that it is in "Off Road Mode" i.e. full height and as soon as you exceed 18mph (I think) it will be trying to reduce the ride height back to normal.
Track down someone near you with Hawkeye (there is a list somewhere) and they may be willing to help you out for a nominal charge.
 
hi
right i have a hawk eye myself just not to sure how to use it properly
can any one tell me how to do this then
 
oops bit slow me.
I emailed one or two of the guys off this list to ask their advice re Hawkeye/Nanocom and they were very informative (as most Landy owners seem to be)
I suggest choosing one with the same model as you have and mail them. You will probably get the help you need.
I cant help cos my Hawkeye has not yet landed (Grrrrrrrrrr)
 
hi all
i had prob with my air bags surpensone so fitted 2"lift kit
now when i drive down the road and go over 25 mph it keeps beeping and have a lite on the dash is there away to stop this and if so how do u do it
thanks dave

From memory, you go to Suspension in the main menu, then Programing, then Configration and select coils.

Del.
 
ABS from main menu, which accesses the SLABS ecu, which does suspension and abs.

From there, as stated above.

Clear any faults first, then change configuration. couple of steps to confirm it.

MW
 
ok been out with the hawk eye and still not done the job when i go in to surpension there is no program in that menu my hawkeye is running on 3.0.0 softwear dose it need a update?
if i go in security then program there is a setting for hd/slabs it can be on or off
 
ok been out with the hawk eye and still not done the job when i go in to surpension there is no program in that menu my hawkeye is running on 3.0.0 softwear dose it need a update?
if i go in security then program there is a setting for hd/slabs it can be on or off

ABS menu > Programminng > Configuration

They didnt name a menu Suspension for Disco 2 cos it's managed by the (SL)ABS ECU
 
In this case u better call tech support and they must send u an upgrade CD(this one is free but u need the cable for it which will cost u some money)
 

Similar threads