Freelander Winnie

Member

• Jan 11, 2022

• #21

Thank you @Nodge68 . I wasn't aware of this. It appeared from Hippos previous posts that this was possible.

As I have to do this for a few cars I'm tempted to buy a device to reprogramme keys (if the Hawkeye Pro can't do this). Are you aware of a devise that could do this?

Thanks again

 

Nodge68

Well-Known Member

• Jan 11, 2022

• #22

Freelander Winnie said:

I wasn't aware of this. It appeared from Hippos previous posts that this was possible.

Click to expand...

Hippo's V6 was a 2001 MY, so was a pre facelift. The immobiliser ECM was improved just about the same time as the facelift was released, making it very difficult to code new keys to it, without the LR diagnostic equipment.

 

Freelander Winnie

Member

• Jan 11, 2022

• #23

Yes, there was a big change in 2001 for Freelanders.
Let's hope there is a trick that @Hippo knows how to get new keys and fobs reprogrammed with Hawkeye Pro

 

Freelander Winnie

Member

• Jan 18, 2022

• #24

Hello @Hippo I was just wondering if you had any more info on how to programme a key fobs and or a key to an FL1? Thanks in advance

 

Hippo

Lord Hippo

• Jan 19, 2022

• #25

Freelander Winnie said:

Hello @Hippo I was just wondering if you had any more info on how to programme a key fobs and or a key to an FL1? Thanks in advance

Click to expand...

Still looking for the video I have. Will get back to you when I find it.

 

Hippo

Lord Hippo

• Jan 25, 2022

• #26

Found it. I have over 300 video's and most haven't been named after their content.

On my 2001 v6 using an origional Hawkeye and v7 firmware:

Ems \ security \ ccu \ transmitters = option to add or remove remote fobs

Ems \ security \ ews 3d \ key programming = option to add or remove keys

 

andyfreelandy

Well-Known Member

• Jan 26, 2022

• #27

Hippo said:

= option to add or remove keys

Click to expand...

Looks like this is the option to add or delete a manufacturers key chip.
Does it program the key chip itself or just enable and disable keys already produced.
LR designed it so that if you lost a key, they could send a replacement. The replacement then gets enabled and the lost one gets disabled in case it falls into thiefys sticky mitts.

 

Hippo

Lord Hippo

• Jan 27, 2022

• #28

andyfreelandy said:

Looks like this is the option to add or delete a manufacturers key chip.
Does it program the key chip itself or just enable and disable keys already produced.
LR designed it so that if you lost a key, they could send a replacement. The replacement then gets enabled and the lost one gets disabled in case it falls into thiefys sticky mitts.

Click to expand...

You have the option to add and remove keys from the list. The term 'program' is used but what yer actually doing is associating said key to the car. So it's more like the car remembering the keys 'identity.

To do this you need one key which already works with the car. This is normal practice as it proves you have control over the car. A theif can't just walk up and program their key to it.

You should be able to move keys between cars with this method.