Hi guys (again) small problem, if you've been following all the threads on this site you may have seen that I was fitting a Webasto Heater, well this I have completed.
Here is my next problem, I 99% sure that this was a problem before I fitted the heater, having had all the hoses off, I have refilled as I would have thought it would have been done, as far as I know (50% sure) I don't have an air lock. On a 30 minuet run the bottom radiator hose is cold, heater works fine as does the pre heater. Top hose is very hot, Temp gauge is reading 50 - 55%, fans are kicking in slowly. Tappets are getting noisy as though the oil is thinning.
I have come to a conclusion that the Thermostat is stuck, not having a reference to check against.
Where is it on a TD4? should I run it without to test?
Thanks in advance for the help.
Here is my next problem, I 99% sure that this was a problem before I fitted the heater, having had all the hoses off, I have refilled as I would have thought it would have been done, as far as I know (50% sure) I don't have an air lock. On a 30 minuet run the bottom radiator hose is cold, heater works fine as does the pre heater. Top hose is very hot, Temp gauge is reading 50 - 55%, fans are kicking in slowly. Tappets are getting noisy as though the oil is thinning.
I have come to a conclusion that the Thermostat is stuck, not having a reference to check against.
Where is it on a TD4? should I run it without to test?
Thanks in advance for the help.