bandit600 said:

hello

just put an engine and box into a 54 reg td4 used the clutch master cylinder from the replacement engine so didnt have to reconnect it to slave but went to floor so i changed it with the one off the engine i had just removed, i know it was a good working unit but still hits floor, will go into gear with a fight:fighting2::argue:

has it got to be bled????

only very min fluid loss ie what was in the connector when removing.

the engine and box i know was running fine and had no probs with gears


????????

cheers

Click to expand...

Chaser said:

Given the situation your in, bleeding, in fact changing the fluid completely is the sensible next step.

Click to expand...

bandit600 said:

will it be the same as standard bleeding pump, release and so on???

cheers

Click to expand...

Chaser said:

Yep, but you will probable need to use a hand on the pedal as the return spring doesn't quite lift the pedal from the floor.

keeping the reservoir topped up is a bit of a pain, I fixed a pouring tube to a clean plastic bottle.

Click to expand...

bandit600 said:

thanks chaser that worked, but pedsl seems really high, its about 2" higher then the others and travels atleast this before any contact is felt

any ideas???

cheers

Click to expand...