12boreblue
New Member
Hi Guys
Can anyone shed any light on the following. Had a new crankshaft pulley fitted, all fine. Code for radio did not work so spoke to Landrover, they took radio out and sent off for code, code input all fine. Then... engine management light comes on, take it in new turbo boost valve fitted, light returns, take it back say need new turbo, decide to put this off as laid off in November. Now the radio acts weird by going to different stations, can't take off traffic alert, alarm armed light flashes while you drive! Now I have noticed that the wipers are taking between 3-10minutes before they start, worse the colder it gets. Engine management light comes on for a couple of hours (normally when the revs go over 2000), then it goes off for a couple of days. Just don't want a new turbo if it's another fault, just weird it started after they took the radio out? Anyone got any ideas...please! Also the power seems about the same whether light on or light off! a bit better with light off.
Can anyone shed any light on the following. Had a new crankshaft pulley fitted, all fine. Code for radio did not work so spoke to Landrover, they took radio out and sent off for code, code input all fine. Then... engine management light comes on, take it in new turbo boost valve fitted, light returns, take it back say need new turbo, decide to put this off as laid off in November. Now the radio acts weird by going to different stations, can't take off traffic alert, alarm armed light flashes while you drive! Now I have noticed that the wipers are taking between 3-10minutes before they start, worse the colder it gets. Engine management light comes on for a couple of hours (normally when the revs go over 2000), then it goes off for a couple of days. Just don't want a new turbo if it's another fault, just weird it started after they took the radio out? Anyone got any ideas...please! Also the power seems about the same whether light on or light off! a bit better with light off.
Last edited: