damlimey · Jan 7, 2011

Hi all, P38 tailgate button not responding. rear doors/fuel access working okay so I don't think it's a fuse. Could be something I've done while locking/unlocking but I've been through the handbook and I don't think that's it so...

Where do I go from here?

Thanks in advance,

Geoff

MikeV8SE · Jan 7, 2011

It's hammer time.

damlimey · Jan 7, 2011

Thanks for that... Presumably I use the hammer to beat the crap out of something/body until I feel better?

gemsdad · Jan 7, 2011

damlimey said:
Thanks for that... Presumably I use the hammer to beat the crap out of something/body until I feel better?

yes your hand so it goes numb,then you wont feel all the money coming out of yer wallet.

Datatek · Jan 7, 2011

Climb into the boot and try to remove the door card, then you will be able to open it manually.

sandyt · Jan 7, 2011

try unlocking the car with the key not the key fob the tailgate gets its signal from the drivers door lock and the switch maybe on the way out mine did this and it was part of a problem with the fuse box under the bonnet

gashead1974 · Jan 7, 2011

damlimey said:
Hi all, P38 tailgate button not responding. rear doors/fuel access working okay so I don't think it's a fuse. Could be something I've done while locking/unlocking but I've been through the handbook and I don't think that's it so...
Where do I go from here?
Thanks in advance,
Geoff

Had this over christmas although only the lower section.
Can you hear the motor/soloniod trying to work when you press the button?

damlimey · Jan 7, 2011

Hi guys,

My Thanks to gashead1974, Sandyt and Datatek. Climbed into the back, removed carpet panel and freed sticky lock. Done a quick lube, and all sorted so thanks for that.

Hopefully, I'll be able to return the favor sometime...

Geoff

frankenbus · Jan 7, 2011

Does the button spring back out when released? Mines a bugger for sticking in every couple of months or so no matter how much 'lube' I give it. As stated above get access to the mechanism by removing the lower tailgate internal cover and is simple enough to sort out.

frankenbus · Jan 7, 2011

frankenbus said:
Does the button spring back out when released? Mines a bugger for sticking in every couple of months or so no matter how much 'lube' I give it. As stated above get access to the mechanism by removing the lower tailgate internal cover and is simple enough to sort out.

Oops, head up bottom moment, should have read that problem already solved....time for lie down in dark room!

MikeV8SE · Jan 7, 2011

damlimey said:
Hi guys,

My Thanks to gashead1974, Sandyt and Datatek. Climbed into the back, removed carpet panel and freed sticky lock. Done a quick lube, and all sorted so thanks for that.

Hopefully, I'll be able to return the favor sometime...

Geoff

And you didn't even get to use a hammer! Shame

Datatek · Jan 8, 2011

frankenbus said:
Does the button spring back out when released? Mines a bugger for sticking in every couple of months or so no matter how much 'lube' I give it. As stated above get access to the mechanism by removing the lower tailgate internal cover and is simple enough to sort out.

Forget the lube, take the button apart and you will probably find the button return spring has rusted through. £40 for a new switch assembly, 10p for a new spring if you can find one. I ended up making one

damlimey

New Member

MikeV8SE

New Member

damlimey

New Member

gemsdad

NOT BOTHERED.

Datatek

Well-Known Member

sandyt

Well-Known Member

gashead1974

Member

damlimey

New Member

frankenbus

Member

frankenbus

Member

MikeV8SE

New Member

Datatek

Well-Known Member

Similar threads