howardo
New Member
I looked on ebay there is a lot of cheap 1.8 petrol ones:lol:
Id want a td4 commercial, but thems to dear
get a l-series diesel, cheaper and betterer
get a l-series diesel, cheaper and betterer
Hippo
Lord Hippo
Tis a problem. Not many commercials about as they didn't make many. You could buy a 5 door td4 and cover the rear windows. You still got yer digga?I looked on ebay there is a lot of cheap 1.8 petrol ones:lol:
Id want a td4 commercial, but thems to dear
Irishrover
Well-Known Member
Thanks for all the replies (And entertainment !!) guys. Must say that the modified seal fix looks very neat and looks better than the original LR !! The Son-in-Law is into double glazing and I think a request for a couple of foot of window beading is in order.
My mate and his Missus are coming over here next week and he has picked up a s/h tailgate in Epson Green (Same colour as mine), rust free from a breakers in Coventry for me.
I'm hoping that the handle comes off mine o.k. without breaking any studs-looks like the can of Plus Gas I have had for years is going to earn it's corn-or reputation ! Would hate to have to buy another handle for between £70-£100-we will have to wait & see. I also have a can of the freezing release spray, has anyone used it-is it any good ?
Keep you posted
My mate and his Missus are coming over here next week and he has picked up a s/h tailgate in Epson Green (Same colour as mine), rust free from a breakers in Coventry for me.
I'm hoping that the handle comes off mine o.k. without breaking any studs-looks like the can of Plus Gas I have had for years is going to earn it's corn-or reputation ! Would hate to have to buy another handle for between £70-£100
-we will have to wait & see. I also have a can of the freezing release spray, has anyone used it-is it any good ?Keep you posted
Last edited:
hiya
may i also say check the sleeved grommet that goes round the loom that goes to the rear high level brake light, mines was perished and noticed water and mud at the bottom of the door, also the mud etc had blocked the drainage holes
used a tin of wd40 with the tube on, poked it through all the holes and gave it a blast and now all clear
cant find a suitable sized sleeved grommet, looks around 35 mm , but really need 2 as the door is double sleeved, so most proberly going to use some silicone
plus I've never seen that kind of trim before would u be so kind to put a link up where to buy it from please, hope u didn't mind me asking
hope u didnt mind me saying but just thought i would mention it just in case u didn't notice it
gary
may i also say check the sleeved grommet that goes round the loom that goes to the rear high level brake light, mines was perished and noticed water and mud at the bottom of the door, also the mud etc had blocked the drainage holes
used a tin of wd40 with the tube on, poked it through all the holes and gave it a blast and now all clear
cant find a suitable sized sleeved grommet, looks around 35 mm , but really need 2 as the door is double sleeved, so most proberly going to use some silicone
plus I've never seen that kind of trim before would u be so kind to put a link up where to buy it from please, hope u didn't mind me asking
hope u didnt mind me saying but just thought i would mention it just in case u didn't notice it
gary
Last edited:
Vagrent
Yaaaar
The position I hold of materials controller operating a telescopic handler, I going well thanks
Hippo
Lord Hippo
So you've not dropped anything in the last week then. :boink: (green house roof)The position I hold of materials controller operating a telescopic handler, I going well thanks
Irishrover
Well-Known Member
Can't help with the grommets, other than to say check a breakers.
Regarding the seal section, I have had a look on Ebay-searched "Double glazed window seal" and a load of stuff came up showing loads of different profiles. They will send a sample pack for 99p + post, looking at the seals they sell it in lengths of 3metres plus for around 99p depending on the profile.
Vagrent
Yaaaar
X2 pallets of blocks
clipped drain
smashed a few tiles
But considering I do probably thousands of lifts each week my damage percentage is quite low
I probably #### up about 5% of my lifts, mainly pallet damage and spillages
No injury's
No major ve hick u lar damage
minor scuffs to machine
Hippo
Lord Hippo
You should beep yer horn. Throwing tiles a peeps in the way int the correct way to behave.X2 pallets of blocks
clipped drain
smashed a few tiles
But considering I do probably thousands of lifts each week my damage percentage is quite low
I probably #### up about 5% of my lifts, mainly pallet damage and spillages
No injury's
No major ve hick u lar damage
minor scuffs to machine
thks buddy for that will check it out and still great with the amount of bits u can get on ebay , alot of companies hate it when u say are u going to match the price ive seen on ebay with the same specs etc
appreciate the help
gary
Vagrent
Yaaaar
You should beep yer horn. Throwing tiles a peeps in the way int the correct way to behave.
I do beep my horn..a lot..especially at groundworkers in my way:lol:
I can even be annoying with the reverse beeper, by quickly pressing the transmission disengaged button
Beep beep beep bi-bi beep beep bi-bi-bi-bib beep!::lol: being an irritant is great
Winu
Active Member
Removed handle in mine yesterday
Probably first time from 13 yrs. A lot of dirt...
But when cleaned... not many rusty spots...
First two mounting holes are healthy, lower have some little "bubbles"...
Third one is the worst
After paint remove...
And cleaning. Rest of rust inserts will be cured chemically.
But i need a new handle... Rubber seal is in terrible condition, one spring fall of and mounting nuts are terrible corroded... No spare parts available from land rover so complete handle is needed.
Probably first time from 13 yrs. A lot of dirt...
But when cleaned... not many rusty spots...
First two mounting holes are healthy, lower have some little "bubbles"...
Third one is the worst
After paint remove...
And cleaning. Rest of rust inserts will be cured chemically.
But i need a new handle...
Rubber seal is in terrible condition, one spring fall of and mounting nuts are terrible corroded... No spare parts available from land rover so complete handle is needed.
Irishrover
Well-Known Member
I have yet to swap my tailgates over. I will post photo's showing the extent of the damage within the next week.
The replacement tailgate has been painted up and I have to swap the innards over from one to the other. Obviously with the weather the way it is, and is forecast to stay pretty much the same, the time is right just in case I have to leave the rear of the car "Open" overnight if the reassembly drags out.
The nuts securing the existing handle are corrosion free and are the studs so hopefully shouldn't be any problems removing it.
The replacement tailgate has been painted up and I have to swap the innards over from one to the other. Obviously with the weather the way it is, and is forecast to stay pretty much the same, the time is right just in case I have to leave the rear of the car "Open" overnight if the reassembly drags out.
The nuts securing the existing handle are corrosion free and are the studs so hopefully shouldn't be any problems removing it.
