Hicap phill
Well-Known Member
Remove the rear panel in the tub & check the feed to the lights.
Also don’t rely on the fuses. Still check for power at the fuse board.
Also don’t rely on the fuses. Still check for power at the fuse board.
Hicap phill
Well-Known Member
Yes the front side lights are both working fine
Hicap phill
Well-Known Member
So if the fronts are working fuses are fine.
Problem is on the rear loom.
As per earlier post now check for power at the rear.
Also what motor & year is it?
Thanks
Problem is on the rear loom.
As per earlier post now check for power at the rear.
Also what motor & year is it?
Thanks
mick the builder
Well-Known Member
If it's an oldy like me, it'll be the bullet connectors. Take them apart and check for juice on feed side. Clean up and put back together.
NiallRussell
Well-Known Member
I something simular to this recently.
The fuses (old class type) in mine where not reliable and I cleaned the connectors and replaces, this then made the lights work 99% of the time.
The fuses (old class type) in mine where not reliable and I cleaned the connectors and replaces, this then made the lights work 99% of the time.
