tetsu0san

tetsu0san

Active Member
Hi all

I've just acquired a Synergy Ronbox from a mate and I would like to wire it up to my P38. The problem is the mate forgot to make a note of where on the loom the two wires need to be spliced into before he pulled it out of his car and I'm a bit stuck.
Does anyone have any any instructions for this please? I've searched online and I've even emailed the company themselves but I can't find any instructions and not had a reply either.
Synergy.jpg

Many thanks
 
Sorry cant help, I dont even know what it is.
But, Argyll was a car company many many many years ago and I think were also involved in a very good tuning company "Minnow Fish" and I think made carburettors but that was when Landies were real Landies
 
tomcat59alan said:
:D:D, that brought back memories. Tablet problems the Boss 's packed in last week maybe mine's on the way out. Happy to be back ?:rolleyes:
Click to expand...
From holiday?
If course matey, plenty to do and more and more work coming into the garage, Iay be able to afford a new RR next year?? Pffff... Happy I am. How's things in your space Alan?
 
Mark Piercy said:
From holiday?
If course matey, plenty to do and more and more work coming into the garage, Iay be able to afford a new RR next year?? Pffff... Happy I am. How's things in your space Alan?
Click to expand...
Still plodding on rewardless, tried the Bastid the other day and it wouldn't start, cranks but no rev counter bit of spray up the inlet and away it goes.changed the temp and crank sensor no difference. :mad: No faults showing on snap on diagnostics. For some reason my Faultmate tells me its not licensed for Gems but I have the paperwork saying it is .F it I'm away next Sunday. :D
 
tomcat59alan said:
Still plodding on rewardless, tried the Bastid the other day and it wouldn't start, cranks but no rev counter bit of spray up the inlet and away it goes.changed the temp and crank sensor no difference. :mad: No faults showing on snap on diagnostics. For some reason my Faultmate tells me its not licensed for Gems but I have the paperwork saying it is .F it I'm away next Sunday. :D
Click to expand...
Is there just the one temp sensor?
Was there any debris on the crank sensor when you swapped it out?
And... Where are you going next week:D
 
Mark Piercy said:
Is there just the one temp sensor?
Was there any debris on the crank sensor when you swapped it out?
And... Where are you going next week:D
Click to expand...
Hi Mark, there are two on the Gems,one for the gauge and the other for the edc? ? That's the one I changed . The crank sensor was clean as it was the week before when I took it out to check, thought it may be breaking down when hot so put a new one in. Off to the house in Fuerteventura to see what its like after 7months,and to pay the rates.Bloody council emailed me telling me the rates were due this month but never replied to my request for their bank details and how much theh want!!! Looks like a face to face meeting next week.:mad::mad: I don't care about the isolation because we're living that way now.
 
tomcat59alan said:
Hi Mark, there are two on the Gems,one for the gauge and the other for the edc? ? That's the one I changed . The crank sensor was clean as it was the week before when I took it out to check, thought it may be breaking down when hot so put a new one in. Off to the house in Fuerteventura to see what its like after 7months,and to pay the rates.Bloody council emailed me telling me the rates were due this month but never replied to my request for their bank details and how much theh want!!! Looks like a face to face meeting next week.:mad::mad: I don't care about the isolation because we're living that way now.
Click to expand...

Is all the paint and decorating stuff all ordered and ready for you over there:D
i do hope you have a relaxing time over there:)
 
tetsu0san said:
Hi all

I've just acquired a Synergy Ronbox from a mate and I would like to wire it up to my P38. The problem is the mate forgot to make a note of where on the loom the two wires need to be spliced into before he pulled it out of his car and I'm a bit stuck.
Does anyone have any any instructions for this please? I've searched online and I've even emailed the company themselves but I can't find any instructions and not had a reply either.
View attachment 218469
Many thanks
Click to expand...

What are the cable ends like, most of the boxes for the p38 have the big connectors that plug in to the unplugged injection pump and have a pipe that tees in to the map pipe,
sound like yours just wires in to the temp sensor tell the engine it is cold ad more fuel, which they all do but some with a bit elastictrickery.
 
tomcat59alan said:
Hi Mark, there are two on the Gems,one for the gauge and the other for the edc? ? That's the one I changed . The crank sensor was clean as it was the week before when I took it out to check, thought it may be breaking down when hot so put a new one in. Off to the house in Fuerteventura to see what its like after 7months,and to pay the rates.Bloody council emailed me telling me the rates were due this month but never replied to my request for their bank details and how much theh want!!! Looks like a face to face meeting next week.:mad::mad: I don't care about the isolation because we're living that way now.
Click to expand...
Fuerteventura, niiiice. We visited there in 2004 while staying in lanzo, beautiful place.. Full of Spanish :rolleyes:..
Do you get any misfiring before the none hot start?
Take some empty paint tins for the meeting:p
 
You must log in or register to reply here.

Similar threads

R
What L322 to avoid?
2 3
Replies
52
Views
2K
Mark Piercy
Mark Piercy
Blob
L322 2010 >2012 speaker wiring - Solved
Replies
5
Views
542
Blob
Blob
P38 Monkey
Wiring question…
Replies
6
Views
467
Flossie
Flossie
British Leyland Rover
Series 3 3/4 truck cab tilt fitting.
Replies
4
Views
724
British Leyland Rover
British Leyland Rover
D
permanent live in engine bay for spotlights
Replies
10
Views
445
lynall
L