neilsdisco1

New Member
I want to unplug the srs airbags on my 300 as it's an off road toy. Does anyone know where it unplugs. I know they unplug at the airbag, but was wondering if there is a plug further down the loom.
 
MOT fail??

Does this answer you question ?

[FONT=Arial,Arial][FONT=Arial,Arial]Airbags, seat belt pretensioners and seat belt load limiters fitted as original equipment. [/FONT][/FONT]​

As far as practicable, check that [FONT=Arial,Arial][FONT=Arial,Arial]all [/FONT][/FONT]airbags fitted as original equipment are present and not obviously defective.

An airbag obviously missing or defective is a reason for rejection
 
Doe this mean i should be ok just to un plug the crash sensor?

Any interference with the SRS electrical circuit will bring up the dash warning lamp.

You haven't told us why you wish to remove the SRS system.
 
Last edited:
Because i want to off road the vehicle and would'nt want an airbag going off!

As it's designed to off road I wouldn't think there would be a problem unless u have an iffy inertia sensor perhaps that's why there's only one now, and that is with the SRS ECU.
Remember it's an inertia sensor and not a knock or bump sensor :)
 

Similar threads