Barbados · Feb 7, 2017

Hi Mates,

I have black steel modulars on my landy now with mud tires, not the 10" ones, I think mine are more like 6.5" wide...bought the landy with these. I am not gonna take the landy off road...yea i know many would be rolling eyes lol.
I bought this landy because I like them, its strong, turbo diesel etc., and to transport my giant scale RC aerobatic airplanes.

Right now it has a lift kit and some stupid crazy a$$ HD springs which are as rigid as mount Everest.
Since I am more in need of comfort and road handling I am thinking of getting a set of CSW springs and going with the aluminum rims ( Disco 1) with less aggressive tires...wished I could find some Boost here but I think thats impossible.

What you guys think? I have attached pics of the modular on my landy now and the aluminum rims I want to go with.

Thanks.

Cheers.

Disco1BFG · Feb 7, 2017

IMHO, alloys every time. And, given your intended predominantly on road usage, and changing to softer springs, = deffo alloys.

I've had a few D1's now, and rate the freestyle alloy for looks strength and practicality ( easy to clean ). SWMBO's D1 has 245/70 R16's on a 7J rim, and they ride really well - mine has 235's on, and is not quite as good..... If you can borrow a set of wheels/tyres to try, I'd recommend it....

Large scale RC sounds interesting too - do you need some off road ability in this regard ?? I ask as those current tyres look pretty off road biased, and comfort will increase with a more "normal" tyre.....

Jam1 · Feb 7, 2017

Personally I prefer the steels.
On another point are those alloys rated for the weight of the 110?

Disco1BFG · Feb 7, 2017

Jam1 said:
On another point are those alloys rated for the weight of the 110?

Good call.

mikescuba · Feb 7, 2017

It's the Freestyle which are NOT rated for a 110. And when I tried to fit them on mine I would have to have fitted spacers. I'm not a fan of spacers as they put extra strain on wheel bearings and I'm not that keen on Alloy wheels on a 110, but each to there own.

200tdiRob · Feb 7, 2017

Modulars in my opinion, just give it that defender look.

Barbados · Feb 7, 2017

The alloys I am looking at are not Freestyle rims...the pic below is the Freestyle type.

mikescuba said:
It's the Freestyle which are NOT rated for a 110. And when I tried to fit them on mine I would have to have fitted spacers. I'm not a fan of spacers as they put extra strain on wheel bearings and I'm not that keen on Alloy wheels on a 110, but each to there own.

.

Barbados · Feb 7, 2017

mikescuba said:
It's the Freestyle which are NOT rated for a 110. And when I tried to fit them on mine I would have to have fitted spacers. I'm not a fan of spacers as they put extra strain on wheel bearings and I'm not that keen on Alloy wheels on a 110, but each to there own.

The rims I want to use are the Deep Dish XS Style
http://www.johncraddockltd.co.uk/wh...1mnh-alloy-wheel-deep-dish-xs-style-7x16.html

The XS might not have come as a defender rim but there are many, many defenders using them and I have never heard of any breaking. The XS looks way stronger than the Freestyles, you can tell so by just the design.

I have read some posts about the Freestyle rims being under rated for the Defender but not the XS. IF anyone KNOWS and not heard about the XS breaking on the defender, please chime in.

These are the XS style which I think looks great as well on a Defender. Since mine has some aluminum trim and on the side steps, I think it will look good. I wont be hauling any trailer or weight either and mine is a 2 seater hard top.

The Disco weighs 2,100 KG
My Defender weighs 2,050 KG and I have since removed about 250KG in 1/4 inch steel which was installed in the entire cargo area, this should essentially drop its weight to 1,800 KG

.

.

Barbados · Feb 7, 2017

Disco1BFG said:
IMHO, alloys every time. And, given your intended predominantly on road usage, and changing to softer springs, = deffo alloys.

I've had a few D1's now, and rate the freestyle alloy for looks strength and practicality ( easy to clean ). SWMBO's D1 has 245/70 R16's on a 7J rim, and they ride really well - mine has 235's on, and is not quite as good..... If you can borrow a set of wheels/tyres to try, I'd recommend it....

Large scale RC sounds interesting too - do you need some off road ability in this regard ?? I ask as those current tyres look pretty off road biased, and comfort will increase with a more "normal" tyre.....

The alloys I want to use are the XS not the Freestyle.
The tyres on the landy are Mud tires which I dont need. The previous owner was a surfer so mybe he installed those for the loose sand he would have driven on by the beach.
Do not need to go off road use for my airplanes.

Disco1BFG · Feb 7, 2017

Barbados said:
The alloys I want to use are the XS not the Freestyle.
The tyres on the landy are Mud tires which I dont need. The previous owner was a surfer so mybe he installed those for the loose sand he would have driven on by the beach.
Do not need to go off road use for my airplanes.

Apologies if we have somehow ended up with crossed wires - I only meant I like the freestyle - not that everybody else will be forced to have by my decree

.... or else

Barbados · Feb 7, 2017

Disco1BFG said:
Apologies if we have somehow ended up with crossed wires - I only meant I like the freestyle - not that everybody else will be forced to have by my decree .... or else

No problem...we are not perfect. Thanks for replying and sharing your input.

Cheers.

mojo247 · Feb 7, 2017

you need to check the PCD (pitch circle diameter) for the wheel studs/nuts. Freestyle 1s have a different PCD than the more modern wheels

Barbados · Feb 7, 2017

mojo247 said:
you need to check the PCD (pitch circle diameter) for the wheel studs/nuts. Freestyle 1s have a different PCD than the more modern wheels

I am not using the Freestyle alloys. I will check the fitment for the XS alloys which are the ones i want to use.

frog hopper · Feb 7, 2017

I don't think your going to be able to keep the alloy center caps if that makes any difference.

Barbados · Feb 10, 2017

frog hopper said:
I don't think your going to be able to keep the alloy center caps if that makes any difference.

.
Thats true. I have been doing some repairs, maintenance and upgrades to a TD5, installed new turbo, did the brakes and a full service.
The drive flanges were showing signs of wear and the owner sent me some HD flanges to install. Looking that them installed made me rethink swapping out to alloys now

They look cool and they are practical with more spline mating area on the flange. I prefer the flange to wear than the shaft, easier to change and much more economical..but you gotta love the look of them.

The grease cap in nice too, a big hex shaped threaded cap with a rubber seal.

.

Barbados · Feb 10, 2017

These wheels weighs a lot...its unreal..85 lbs each.
.

.

Barbados

Active Member

Attachments

Disco1BFG

Well-Known Member

Jam1

Well-Known Member

Disco1BFG

Well-Known Member

mikescuba

Well-Known Member

200tdiRob

Active Member

Barbados

Active Member

Barbados

Active Member

Barbados

Active Member

Disco1BFG

Well-Known Member

Barbados

Active Member

mojo247

Active Member

Barbados

Active Member

frog hopper

Well-Known Member

Barbados

Active Member

Barbados

Active Member

Similar threads