neilly
Well-Known Member
Honestly if the vehicle has the orignal dampers, then why not change them and the air bags?
Cheers
Honestly if the vehicle has the orignal dampers, then why not change them and the air bags?
Cheers
In all honesty, I hadn’t given the other side any thought at this stage. Simply getting the vehicle operational again.
I’ll probably use the replacement of other side as entertainment over Christmas.
Tricky of York
Well-Known Member
I’ve replaced one side on both of my L322’s as a quick failure repair without any adverse effect on ride performance. I think it depends if the old struts were replaced in pairs or not. They usually have a manufacturing sticker with a date so worth checking out. The most recent one I replaced had a 2005 sticker, same as manufacture year, but could have been a salvage replacement part in the past. There’s always a bit of guesswork with a second hand car even if it has a history file. I’d be inclined to enjoy Xmas and deal with the air bags later.
Tricky
PS might want to shop around for the strut next time as £400+ seems a bit steep.
Thanks Tricky.I’ve replaced one side on both of my L322’s as a quick failure repair without any adverse effect on ride performance. I think it depends if the old struts were replaced in pairs or not. They usually have a manufacturing sticker with a date so worth checking out. The most recent one I replaced had a 2005 sticker, same as manufacture year, but could have been a salvage replacement part in the past. There’s always a bit of guesswork with a second hand car even if it has a history file. I’d be inclined to enjoy Xmas and deal with the air bags later.
Tricky
PS might want to shop around for the strut next time as £400+ seems a bit steep.
I’ve owned the car for 7 of its 11 years and bought it from Landrover so I guess it has its original struts.
As for the cost of the unit, I couldn’t find anything much cheaper for a 2010 - 2012 with variable damping.
Don’t suppose any one knows of a decent source to download Rave. I can find the pre 2010 workshop manual but not the complete rave.
In addition to that what’s the currently the cheapest tool option to do things like height calibration. I’ve got icarsoft and have block box solutions for my old discovery, but the l332 unlock key is monster money.
neilly
Well-Known Member
Tricky of York
Well-Known Member
Fair point, forgot yours is 2010, 11 years isn’t bad considering the weight of the car but if my 2005 strut was original that’s a decent 16 years and 154,000 miles life. That other bag of yours may have years left in it. Think of all the Christmas presents you can buy with £400.
Tricky.
tomcat59alan
Well-Known Member
Fair point, forgot yours is 2010, 11 years isn’t bad considering the weight of the car but if my 2005 strut was original that’s a decent 16 years and 154,000 miles life. That other bag of yours may have years left in it. Think of all the Christmas presents you can buy with £400.
Tricky.
Tricky of York
Well-Known Member
Mine were the same. Heat if you can. If not loads of penetrating fluid and a lump hammer. There are freeze and penetrating sprays that can work well in some applications if your still struggling. Good luck.
Tricky
Oh joy. Slightly cautious of heat near the driveshaft boot. It’s had plenty of penetrating fluid, and the hub moves freely.Mine were the same. Heat if you can. If not loads of penetrating fluid and a lump hammer. There are freeze and penetrating sprays that can work well in some applications if your still struggling. Good luck.
Tricky
It takes me back to working on series 2a and 3’s with my dad. I remember now why I’ve tried to steer clear of working on landrovers
Tricky of York
Well-Known Member
If you do try the freeze products then you’ll probably need to empty a few cans on it. Then wait about ten minutes before trying to turn it. Fingers crossed but when mine eventually came free they were still resisting to the end.
Tricky of York
Well-Known Member
Same - the problem is that it’s assembled without grease so the seizure goes all the way through to the bolt head. Nightmare but it will give eventually, just when is the big question. Seriously try the freeze/release spray it can’t make it any worse.
Tricky
Tricky
Tricky of York
Well-Known Member
Should be one person, depends on which person though.
Well done by the way.
Tricky
Well done by the way.
Tricky
Tricky of York
Well-Known Member
Unfortunately, these watches were originally penned under BMW management not Audi. That may stir a reaction! Sorry but I’ve own several Audi’s, all superb machines.Just as I started to loose my farkin marbles it mysteriously just goes into position.
I tell there’s no bonkers engineering like this on my R8. It’s put together like a watch
Tricky
I think when they were penned by bmw, that was done on an excursion to Solihull whilst visiting one of the local drinkerys, discovering some cheap British lager lol
Luckily it’s all back together, just awaiting the call from the local landerover dealer for the replacement bolts.
Hoping that there’s no leaks from that bizarre rigid airline union.
Luckily it’s all back together, just awaiting the call from the local landerover dealer for the replacement bolts.
Hoping that there’s no leaks from that bizarre rigid airline union.
RangeRoller dt
Well-Sprung Member
Things like springs, shocks , discs or pads always need to be changed in pairs
