tomcat59alan
Well-Known Member
They will make the steering very vague as you haven't included a link !
JohnnyCrash
New Member
They will make the steering very vague as you haven't included a link !
:doh:
Grit Valve
2000 4.6 Vouge
Think he probably ment after market polybushes
I've had mine in since July they have been fine and will be much easyer if ever I need to do them again.
I know you don't like them
Hah! Sorry I'm such a dimwit, but someone solved the riddle - it's the new britpart poly bush set. They claim they have been made to the same degree of softness as rubber, so as not to ruin the ride, but then they have been known to make a few ambitious claims in the past...They will make the steering very vague as you haven't included a link !
It's already on order, so I guess I'll find out - just wanted to know if anybody tried them.
Think he probably ment after market polybushes
I've had mine in since July they have been fine and will be much easyer if ever I need to do them again.
I know you don't like them
You can fit what you want. No problem, i prefer the proper bushes, but each to their own. But a new set of bushes of either type will make the suspension more taut and give the impression of a stiffer ride. But it is actually the axles resistance to articulation that has been tightened up not the suspension rate as such.
Datatek
Well-Known Member
I wouldn't fit **** part anything
I wouldn't fit **** part anything
Think the attraction of these poly bushes is that they are easy to fit and change.. Once you have wrestled the rubber bushes out that is. But i would think they are going to wear out a lot sooner than the rubber units that's for sure.
Grit Valve
2000 4.6 Vouge
Think the attraction of these poly bushes is that they are easy to fit and change.. Once you have wrestled the rubber bushes out that is. But i would think they are going to wear out a lot sooner than the rubber units that's for sure.
Your just old school
The milage I do I wouldn't of thought so
It will take a while is give it a hour it two there be done again with ease
Your just old school
The milage I do I wouldn't of thought so
It will take a while is give it a hour it two there be done again with ease
Think that is what i said. I have a press to do a proper job, that will last ten years or more, so it would be a no brainer to use something inferior.
