muddythelandy

New Member

• Nov 8, 2007

• #1

where would I get a decent bit of thick rubber or closed cell foam to replace the ****ey open cell foam "seal" that land rover use under the windscreen to get the bulkhead to rust?

Does anyone make a better replacement seal?

Also, a place to buy the double sided sticky foam seal used between assorted body panels - whats it called and anyone know of a good (ie cheap) place to get it.

Cheers chaps and chapettes

 

S

slob

Well-Known Member

• Nov 8, 2007

• #2

try woolies-trim.co.uk

Woolies Trim - Bonnet Tape

 

C

CharlesY

Well-Known Member

• Nov 8, 2007

• #3

The London Rubber Company do a good line in rubbers.

Check them out on Google

 

Sirus

Your all Banned except me

• Nov 8, 2007

• #4

Dunt Nobber know......ask him

 

muddythelandy

New Member

• Nov 8, 2007

• #5

Thanks Slob - that Woolies is good - got the rubber strip for the window and sealant strip. spot on.

 

S

slob

Well-Known Member

• Nov 9, 2007

• #6

ah have my moments.. but do try and keep it quiet

 

GRUNT

Well-Known Member

• Nov 9, 2007

• #7

I got mine from Paddocks it was in an original Land Rover Parts bag an it's a closed cell type foam.

Also, a place to buy the double sided sticky foam seal used between assorted body panels - whats it called and anyone know of a good (ie cheap) place to get it.

Click to expand...

Draught excluder from B&Q, works quite well.

 

T

TimidToad

New Member

• Nov 9, 2007

• #8

The Double sided sticky foam to use, would be a security tape that glazers use. if u have a local double glazing firm close by try them. or u might get it at a good builders merchant...
it comes in loads of thickness's upto 10mm so u should be able to find what u need.

there is a company called Cental Extrusions in Brum that sell it by the case
(25 rolls) if all else fails.

 

L

lrfc

Member

• Nov 11, 2007

• #9

Try durex or that little machine in the gents.