BearDy89

BearDy89

Well-Known Member
Just upgraded my suspension so this is up forsale.

Supergaz +2" lift kit
All in good condition, includes:
4 Springs
4 Dampers
Front Turrets + rings.
Spring Retainers
MOST nuts and bolts i lost a few and reused some but most are there.

Will need new bushes all round.

I will some pics up ASAP

Not sure what its worth somewhere around £60....
Collection only Bristol
 
I believe just over 2 yrs.

was fitted on a defender.

i believe its normal load but i didnt purchase or fit the kit so cant say for sure. but my new medium load kit feels stiffer, so would assume old kit was light or normal duty.
 
sus (2).jpg


sus (3).jpg


sus (1).jpg
 
Last edited:
What else did you get done, like brake pipes and props? im just asking as i want to lift mine but dont want to pay a fortune. i know what needs doing to get it done properly (before anyone lectures me!!!) And if you managed all right with changing nothing then i might take it off you (if funds alow!)
 
Who ever fitted this kit.
Fitted extended rear brake lines. Thats it.

Some say you need loads and loads of stuff but i don't have any problems.
 
I believe my front prop is wide angle but i cannot be sure of this because ive never looked at another prop.

Whether this needs to be done or not is up for debate....
 
Your not that far from me, feel free to arrange to pop round and look at the kit and also my landy to see that I've only got extended brake lines and wide angle prop.
 
Yeah sure, well i im a wee bit skint at the present time, and wont be able to take it from you until about 2 weeks. If you have other interest dont worry about holding on to it all.
 
Ok no problems, its only going on here and not Ebay or anywhere so its likely to still be here.
 
Excellent thanks, was looking at my suspension and it looks a bit sad on the back end, so now may be a good time to lift it
 
No worries.


I measured the height of my landy with this kit on as 60" to the bottom of the rock sliders.
fitted brand new +2" out of the box and measured the height to bottom of sliders as 60" so there is no sag in this kit. (as i previously thought there was)
 
You must log in or register to reply here.

Similar threads

J
D1 suspension - improve ride quality?
Replies
9
Views
731
Jalfrezi
J
L
For Sale NEW SPARES - MAINLY SERVICE PARTS
Replies
2
Views
1K
Litch
L
D
Disco 2 Rusty front suspension woes
Replies
10
Views
2K
Andy Warren
Andy Warren
L
For Sale Lots of accessories, parts and tools
Replies
1
Views
2K
Litch
L
F
£300 Freelander project! ... my first ever Land Rover
2 3
Replies
44
Views
3K
pwood999
pwood999