S

skinman

Member

• Nov 28, 2013

• #1

hi can someone tell me how to remove the shield that protects the sump on my 1.8 freelander 2004 ,

 

SES88

Well-Known Member

• Nov 28, 2013

• #2

There's a range of bolts holding it on from underneath, some on the front subframe, others behind front bumper

 

S

skinman

Member

• Nov 28, 2013

• #3

SES88 said:

There's a range of bolts holding it on from underneath, some on the front subframe, others behind front bumper

Click to expand...

found them thanks for help , wot a pig of a job

 

Kizzeh

Well-Known Member

• Nov 28, 2013

• #4

Copper grease before you put them back on!

 

S

stig41345

New Member

• Dec 14, 2013

• #5

on the subject of sump shields i've noticed there are some 2nd hand sump shields on ebay that have an alloy centre section. will these fit facelift models, as I had a costly experience when a sharp rock pierced the plastic sump shield and holed the sump- not good!

 

SES88

Well-Known Member

• Dec 15, 2013

• #6

stig41345 said:

on the subject of sump shields i've noticed there are some 2nd hand sump shields on ebay that have an alloy centre section. will these fit facelift models, as I had a costly experience when a sharp rock pierced the plastic sump shield and holed the sump- not good!

Click to expand...

Those ones have been modified by owners, if it fit their car it should fit yours

 

JC600

Well-Known Member

• Dec 15, 2013

• #7

Some models had a heat shield running down the centre, these won't protect against rocks.