micknkatenki

Active Member

• Dec 29, 2013

• #1

300tdi 90 1997,

Sump was leaking around where it bolts to block, removed, cleaned very well and re sealed with engine grade sealant, left for a couple of days to 100% cure, refilled, tested all ok, have used a couple of times now and oil leak is back leaking from drivers side front corner and dripping on to diff and running back along sump to block joint and dripping off bottom of bell housing.

Any ideas welcomed.

Could it be out of shape sump, engine cyclone breather blocked forcing oil out ????

Thanks.

 

jamesmartin

Well-Known Member

• Dec 29, 2013

• #2

leaking at bottom join on timing case to block

 

micknkatenki

Active Member

• Dec 29, 2013

• #3

jamesmartin said:

leaking at bottom join on timing case to block

Click to expand...

Thanks James, that was quick, will double check and have a look.

Thanks.

 

B

Blanny

New Member

• Dec 30, 2013

• #4

Try a new breather on it

 

currymunster

Active Member

• Dec 30, 2013

• #5

Maybe oil filter housing - That can be annoying where it bolts to side of engine. It's kind of in the right place (Worth a check)

 

micknkatenki

Active Member

• Dec 30, 2013

• #6

Thanks guys, all I need now is for it to stop F@#KING RAINING.

 

Landyfox

Well-Known Member

• Dec 30, 2013

• #7

jamesmartin said:

leaking at bottom join on timing case to block

Click to expand...

Yup mine is doing just that!

 

bigvinnie

Active Member

• Dec 30, 2013

• #8

same here, its not the top of the block as its bone dry since getting the head done back in November. My vacuum pump is allways wet and I,m looking at this being my main source of oil loss.....or the oil filter assembly where it bolts to block....waiting for the rain to bugger off or going back to work next week to get it on the sommers lifts........should mention the front of the engine and sump is dry but its mostly wet round the bell housing and the mounts.....rear crank oil seal changed in October so I ken that's good as well

 

Last edited: Dec 30, 2013

micknkatenki

Active Member

• Jan 7, 2014

• #9

Still not got underneath to look at this but soon I hope. Got discovery td5 off the road now and that's a priority job.