Shimsteriom
Master Procrastinator
You mean niggerly bits like the tank and seatIt's OK putting the big bits on ! It's ALL the nigerly bits that take your time up
wattfield
AKA Dirk Diggler
Cables, brake lines, brake & clutch bleeding & wiring are a pain! I'm glad mine came with braided brake lines, but I'll still have to bleed all 7 lines at some point!It's OK putting the big bits on ! It's ALL the nigerly bits that take your time up
The Virago's bars are growing on me..
Magicgrotto
Well-Known Member
No I mean Sortin the wiring out Like how much can I get in the head light Not that much Making sure the earths are good & the list goes on & on & on & on
Like how much can I get in the head light Not that much Making sure the earths are good & the list goes on & on & on & on Colthebrummie
Well-Known Member
I think it looks fantastic. Shame about the tank, that must be very annoying.
Col
Col
Magicgrotto
Well-Known Member
Hi Boy's & Girl's I'm Back !
Yes @Colthebrummie proper F00000KED me off
Well another box of bits turned up today so time to start again !
NEW Oil filter & oil ! in !
New Mirrors & clamps on !
New grips on !
Also been sorting wiring out & found out the indicators are NO good without some resisters in line SO have to get some different ones ! BUUUUUUGER & BIG BOX OF SWEAR WORDS ! LOL
Yes @Colthebrummie proper F00000KED me off
Well another box of bits turned up today so time to start again !
NEW Oil filter & oil ! in !
New Mirrors & clamps on !
New grips on !
Also been sorting wiring out
& found out the indicators are NO good without some resisters in line SO have to get some different ones ! BUUUUUUGER & BIG BOX OF SWEAR WORDS ! LOLColthebrummie
Well-Known Member
Sorry, didn't mean to pizz you off, I was commiserating with you over your comment about the fish eyes in the tank. I still think it looks great, it's almost too good to give to the missus.
Col
Col
Magicgrotto
Well-Known Member
PMSL @Colthebrummie meant the fish eye not you ! LOL
Magicgrotto
Well-Known Member
WELL IT LIVES ! Well sort of ! Going to have to change the fuel Old / new fuel been stood in fuel cans while it's been stripped ! smells good but she wont stay running ! had the float bowls off & they look ok , plugs are dry so that tells me she aint getting fuel ! Had this problem when I first got it !
WISH ME LUCK ! I'll be BACK ! LOL
Going to have to change the fuel Old / new fuel been stood in fuel cans while it's been stripped ! smells good but she wont stay running ! had the float bowls off & they look ok , plugs are dry so that tells me she aint getting fuel ! Had this problem when I first got it ! WISH ME LUCK ! I'll be BACK ! LOL
Colthebrummie
Well-Known Member
At least you can get at your carb to clean/inspect, I have the same problem with one of my scooters and I need to remove a stack of plastic panels that fit together like a 3D jigsaw.
Col
Col
Magicgrotto
Well-Known Member
Hope it's a fuel prob Col as I don't fancy taking the carbs off
Colthebrummie
Well-Known Member
No, I don't blame you. Carbs are my nemesis, whatever I do to fix/clean them, they are usually worse afterwards.Hope it's a fuel prob Col as I don't fancy taking the carbs off
Col
WELL IT LIVES ! Well sort of !
WISH ME LUCK ! I'll be BACK ! LOL
Good Luck !!
My V-Max was like that when I got it running again - old fuel had created a load of black treacle in the tank, fuel pump, and carbs
. Cleaned the tank with caustic soda - fuel pump got the same, and the carbs, well ...... Best thing i ever got for cleaning carbs was an ultrasonic cleaner - with the right nasty chemical in, it gets rid of all known dirt/crud/sh*t etc. ..... and quite useful for cleaning all sorts of other junk, oops I mean essential parts.
Magicgrotto
Well-Known Member
I'm back ! well two things stopped it running correctly, 1st was a ME made fault didn't clean the frame/air box out enough sucked a LOAD off blastin grit into the carb slides so another GOOD clean then a tin of spray paint to stick/seal any more grit in place the 2nd was/is the battery the Bike would NOT run for more than 5mins even after the battery had been on charge all night & just manage to start the bike ! so today i took the battery off the caravan & it struck up straight away & kept running untill I switched it off , & struck up first hit of the button SO NEW battery ordered & a different set of indicators , as the 1s i got wont flash !
didn't clean the frame/air box out enough sucked a LOAD off blastin grit into the carb slides so another GOOD clean then a tin of spray paint to stick/seal any more grit in place the 2nd was/is the battery the Bike would NOT run for more than 5mins even after the battery had been on charge all night & just manage to start the bike ! so today i took the battery off the caravan & it struck up straight away & kept running untill I switched it off , & struck up first hit of the button SO NEW battery ordered & a different set of indicators , as the 1s i got wont flash !
Magicgrotto
Well-Known Member
Ah Ah court yu sneeeeekin abut yes getin there slowly mate waitin for stuff to arrive then on the last push
sneeeeekin abut yes getin there slowly mate waitin for stuff to arrive then on the last push 
Weldy
Well-Known Member
Its taking ages to catch up!! Been in the loony bin for yonks!!! Who's having first go?? I bet it's you!! And you feck off for hours and say to Ange I had to give it a good test!!! Putting money on it!!!!Ah Ah court yu
Magicgrotto
Well-Known Member
well urm yes that will be me How would I live with misen if owt happend to Ange ! qwik blast around block just to check it ok then sort mine out & when it's done both for MOT ex ex ex !
How would I live with misen if owt happend to Ange ! qwik blast around block just to check it ok then sort mine out & when it's done both for MOT ex ex ex !
Shimsteriom
Master Procrastinator
You can't need much more for it now?waitin for stuff to arrive then on the last push
Magicgrotto
Well-Known Member
New indicators , new back brake switch as the old 1 tried to set it on fire yesterday
then the tank to get polished , just been on with getin the fish eye out front brake to blast then paint then get Good ridge brake pipe bleed up then just check every thing is tight , & we should be good to go !
