O

opl505e

New Member

• Feb 13, 2007

• #1

hi, i want to swap my straight 6 in my 109 for a prima turbo diesel, why does dudleigh say their kits are only for 4 cyl landy?

whats the difference?
ive got lots of flywheels to use from landies if it is just that.....enlighten me


also how would a normal landy 2.5 td fit in a 2a 109(late model)

please help!

 

oil dripper

Well-Known Member

• Feb 14, 2007

• #2

the bolt holes on a six cylinder bellhousing are spaced different to a four cylinder one you need a 4 cylinder bellhousing to swap with your original and although the engine mounts are in the same place as a 4 cylinder the gearbox sits about 6 inch further back than a 4 cylinder chassis as for the td throw it away there crap although it will fit as long as it goes to a four cylinder bellhousing and a bit of wiggling and wiring

 

O

opl505e

New Member

• Feb 14, 2007

• #3

so if i have a 4 cylinder gearbox bellhousing do i need to move the gearbox forward?

 

oil dripper

Well-Known Member

• Feb 14, 2007

• #4

i honestly cannot remember it was about 15 yrs ago since i last had a 6 cylinder. i know if you snoop about enough online you,ll find out