chunk2008-2008

Member

• Apr 20, 2016

• #1

I want to convert my series 2 to power steering which rack would do the job best ? . It has a rover v8 in it which has a pump fitted so it's just the rack I need . Many thanks.

 

kommer2013

Active Member

• Apr 20, 2016

• #2

maybe a defender or the 90-110 type of steering box, i was just reading about a canadian bloke that did a swap the other day.
some use different steering boxes from other cars but it all depends on what mods you want to do to the chassis to fit it.

 

chunk2008-2008

Member

• Apr 20, 2016

• #3

Ok I will have to do some more research many thanks .

 

300bhp/ton

Well-Known Member

• Apr 20, 2016

• #4

There are many ways to fit PAS. Either by use of hydraulic rams and the stock steering or using a new column and box. There is choice on the box and column, depending on you goal, cost and how you want to fit it. There are also people fitting Electric PAS too these days.

I opted for a p38a box. More details in my build thread:
https://www.landyzone.co.uk/land-ro...suspension-rebuild.298104/page-2#post-3734074

 

chunk2008-2008

Member

• Apr 20, 2016

• #5

Spot on thank you

 

Z

z4cAtS

Member

• Apr 21, 2016

• #6

Hello, do you have any photos of the PAS pump mounting arrangement please?

I am just about to re-chassis my S1 with an SD1 3.5 and would like some ideas of how the pump goes while I can mock things up.

Thanks

 

chunk2008-2008

Member

• Apr 28, 2016

• #7

Sorry I've been away and only just read your message. My engine is completely striped down at moment so photo would be no good to you . Sorry.