Hello everyone, I am experiencing significant vibration on the steering wheel when travelling at speeds of 50mph and above. I tried removing the front prop and driving with it off but the vibrations remain. I have renewed the steering damper bushes as one was goosed. Now I have recently renewed the passenger side swivel ball and I don’t recall having significant vibrations before that (there were some but not excessive). When I did the swivel pin preload check it was nearing the tight side but still acceptable as I thought at the time, I had also used all the shims that came in the kit and thought it would “bed in anyway”. So would having the swivel airing on the tight side cause steering vibration?? Have I messed up and need to recheck my preload? Any advice or personal experiences appreciated, it’s the usual it could be many different things issue but as that was the last thing I touched I guessed there would be where to start. Oh it’s a 1994 defender 300tdi 90
Colthebrummie
Well-Known Member
Are the wheels balanced? Start with the simple stuff.
Col
Col
payydg
Well-Known Member
Yeh check the wheel balancing. Take it somewhere that does it properly. Not one of those budget tire places
robbie the greatl
Active Member
wheel balance and tyre pressure to set swivel shims use fishing scales to pull steering part of hub set to about 5 lb moving with no resistance at about 5 lb wont be far out
robbie the greatl
Active Member
check wheel bearings too
Discodevon
Well-Known Member
Wheel balancing, but as suggested make sure it’s done proper not buy a bodger
They were changed on my chassis swap less than two year ago, but I will check, thanks
The bolts have to be extremely tight. They can look solid, but I'd get a big bar on to make sure.
