M

Marius007

New Member

• Feb 16, 2014

• #1

Everytime I start the car the steering wheel drops all the way down and I have to adjust it up again. Seems like the steering tilt forgets the memory i setting.

Any tips?

 

2.0_hippo

Well-Known Member

• Feb 16, 2014

• #2

Set the wheel to the required position and then save the setting to one of your keys by using the numbered buttons on the side of the drivers chair base

 

M

Marius007

New Member

• Feb 16, 2014

• #3

The problem is everytime I turn the ignition on the wheel drops all the way down, even if I save the memory settings. The seat memory works, but not the steering tilt. I have tried my spare key too with no luck. Seems like the car forgets the memory settings for the steering tilt everytime I turn the ignition off.

 

T

tomcat59alan

Well-Known Member

• Feb 16, 2014

• #4

Alzheimer's, it happens to the best of us, eventually

 

Datatek

Well-Known Member

• Feb 17, 2014

• #5

Marius007 said:

The problem is everytime I turn the ignition on the wheel drops all the way down, even if I save the memory settings. The seat memory works, but not the steering tilt. I have tried my spare key too with no luck. Seems like the car forgets the memory settings for the steering tilt everytime I turn the ignition off.

Click to expand...

Get the function turned off with diagnostics, it will only break if you let it keep moving.

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Feb 17, 2014

• #6

Datatek said:

Get the function turned off with diagnostics, it will only break if you let it keep moving.

Click to expand...

+1, is what I did....

 

M

Marius007

New Member

• Feb 17, 2014

• #7

Is it possible to do this myself, how?

 

Datatek

Well-Known Member

• Feb 17, 2014

• #8

Marius007 said:

Is it possible to do this myself, how?

Click to expand...

Can be done with Allcomms.

 

2.0_hippo

Well-Known Member

• Feb 17, 2014

• #9

Only breaks if you use the wheel to lug yourself in and out of the car !

I have set mine slightly off the max extended mode so the the motor doesn't force itself to stop when it reaches the end of its cycle.

 

H

Herald

Member

• Feb 17, 2014

• #10

I had this problem. Check all the fuses. From memory there's a 5 amp fuse that had blown.

 

M

Marius007

New Member

• Feb 17, 2014

• #11

Ok, thanks. The wierd thing is that the memory works fine until you shut the ignition off and on again. Can also hear the motors running after the wheel has reached its original position when turning ignition off. Seat memory works fine. Coud it be fault with the Steering Wheel Adjustment Control Module? Is it there the memory is ''saved''?

 

Last edited: Feb 17, 2014

M

Marius007

New Member

• Feb 19, 2014

• #12

Any one know were the steering wheel relays are placed?

 

2.0_hippo

Well-Known Member

• Feb 19, 2014

• #13

Check on raves wiring diagrams