Redsunsuperman666

Member

• Apr 7, 2022

• #1

Hi everyone,

I searched the forum with no luck so far i have also scoured my defender manual and cant find the dimensions for the dust cover that goes over the steering drop arm ball joint can anyone help?

The ball joint itself is in great condition and no damage or dirt in it so just want to replace the rubber boot.

Thanks
Mark

 

Flossie

Well-Known Member

• Apr 7, 2022

• #2

Following...as I have the same issue, advisory on the last mot but completely knacked now. I do have a reconditioned drop arm to go on though if needs must. My 110 isn't used much now I've got a RR p38 so the joint won't suffer exposed for now.

 

D

David Leech

Well-Known Member

• Apr 7, 2022

• #3

Is this the part you need?
https://www.paddockspares.com/a0408-dust-cover.html

 

Redsunsuperman666

Member

• Apr 7, 2022

• #4

David Leech said:

Is this the part you need?
https://www.paddockspares.com/a0408-dust-cover.html

Click to expand...

I have a load of spare dust covers all different sizes all the parts i have looked up on line are correct but they dont give the dimensions i knows its only a couple of quid but i would rather not buy a new one when i have others laying around

 

Redsunsuperman666

Member

• Apr 7, 2022

• #5

The whole kit on lrparts is only £2.50 but i dont need to replace the ball joint just the cover 5 minute job

 

marjon

Well-Known Member

Full Member

• Apr 7, 2022

• #6

Why not just cut the old 1 off and piece it together then you can compare/measure. Its not that hard to measure up even in position surely?

But come on 2.50 isn't gonna break the bank is it.

J

 

Redsunsuperman666

Member

• Apr 7, 2022

• #7

Haha marjon i know but im saving my money for when the chasis needs welding

The old one is f#$@÷d so wont measure correctly.

 

Redsunsuperman666

Member

• Apr 7, 2022

• #8

So looks like i have found the size.

The approximate hole sizes are 30 mm and 16 mm, Uncompressed height 26.5 mm.

Landrover Fit Landrover Defender and Discovery 1 steering joints. 2002 Freelander Front Ball Joints. Land Rover Series III track rod ends.


Fit anti roll bar links on the pre 94 defender and series 1 Discovery.