R

Rorie

Active Member

• Apr 10, 2019

• #1

the seal that comes in this kit, does the seal sit flush with the casing, or recessed back 4mm? I've heard both options depending on the seal, so not sure what is right....

Thanks

 

R

Rorie

Active Member

• Apr 11, 2019

• #2

any thoughts? hoping to install tonight.

Cheers

 

mick 1986

Well-Known Member

• Apr 11, 2019

• #3

Rorie said:

any thoughts? hoping to install tonight.

Cheers

Click to expand...

If you have any problems with stuff like this, one of the best people to tag is @jamesmartin

 

discool

Well-Known Member

• Apr 11, 2019

• #4

When I did something similar with my disco the new seal was recessed, so fitted exactly the same way as the original.

 

jamesmartin

Well-Known Member

• Apr 11, 2019

• #5

Rorie said:

the seal that comes in this kit, does the seal sit flush with the casing, or recessed back 4mm? I've heard both options depending on the seal, so not sure what is right....

Thanks

Click to expand...

that style of mud shield sits in to the housing a little so seal needs to be recessed, fill reverse of seal with grease or vaseline to hold garter spring in place before tapping home

 

R

Rorie

Active Member

• Apr 11, 2019

• #6

Thanks.
Is it 4mm back it needs to go? Or will it come to a natural stop point? Should i get the calipers out or is there an easy way to tap home to 4mm?

 

jamesmartin

Well-Known Member

• Apr 11, 2019

• #7

Rorie said:

Thanks.
Is it 4mm back it needs to go? Or will it come to a natural stop point? Should i get the calipers out or is there an easy way to tap home to 4mm?

Click to expand...

tap it in 2mm or so then fit the flange see it binds if so tap seal in a little more