just wondering if anyone has fitted the second row seatbelt mountings on a station wagon floor?
I bought the kit and the crossmember to suit from YRM but there are no fitting instructions.
Any help with pics would be great!
See attached pic of the mounting kit.
I fit a galvanised steel bar 30 x 10 across the chassis inside the first floor support- this is bolted to the chassis each side.
also i weld 25 x 3 straps on the upstand strengthening plates(where seat belt stalks fit) to the chassis....
Thanks for your comment. I found that the 110 uses these mounts if you use the correct crossmember which I got from YRM. This apparently replicates the original Landrover fitment so should be plenty strong enough
