cooper2751
New Member
Hello and may I just say this forum has bee very helpful.
Ok so td4 06 freelander
Having starting issues some times both hot and cold would turn over but not start. Called the AA so as to get it put on computer came up with fault crankshart possition sensor. Which id already assumed form posts on here.
So last night I replaced it. Started like a dream and tick over was good but at 2500 rev it just drops. When moving it will happly go to 3000 revs but same thing.
Check double check and then cbeck again all pipe nothing wrong there as fare as I can see.
Couple of post surjest blocked fuel fillter is this the best idea and why would it only start after I sorted other issue?
Any ideas many thanks
Ok so td4 06 freelander
Having starting issues some times both hot and cold would turn over but not start. Called the AA so as to get it put on computer came up with fault crankshart possition sensor. Which id already assumed form posts on here.
So last night I replaced it. Started like a dream and tick over was good but at 2500 rev it just drops. When moving it will happly go to 3000 revs but same thing.
Check double check and then cbeck again all pipe nothing wrong there as fare as I can see.
Couple of post surjest blocked fuel fillter is this the best idea and why would it only start after I sorted other issue?
Any ideas many thanks