out on the road yesterday and after a couple of minor floods the Srs light came on.
So connected a Lynx diagnostic and came up with system TRW SPS, under fault code I had “1032 Ignition voltage Out of range” cleared this and was told “not all DTCs have been cleared. Checked again and came up with the same thing.
Then checked under special functions and got Part no. GC973360078E. “Crash detected yes”
I can’t find a way of resetting this or any part no as above
Any help gratefully received Simon

If the SRS module is registering a crash code, then I believe it needs to be taken apart, and have the code cleared by soldering a data connection to the memory chip.

It's easier to simply replace the module.

Nodge68 said:

If the SRS module is registering a crash code, then I believe it needs to be taken apart, and have the code cleared by soldering a data connection to the memory chip.

It's easier to simply replace the module.

Click to expand...

Thank you. which module and is it straight forward first problem I’ve had with the P38 so all new to me can’t find the part number quoted anywhere Cheers Simon